Advanced Technocracy Inc.
Grain Market, Ambala, Haryana
Send E-mail
Send SMS
Home»Our Products»

Cement & Concrete Testing Equipments

Leading Exporter of cement sampler, blaine air permeability apparatus, lea and nurse air permeability apparatus, air permeability apparatus rigden type, vicat needle apparatus with dashpot and le chatelier mould from Ambala.

REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Cement Sampler

This is a brass tube approximately 53cm long and 2.8 cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm die is drilled on the tube neahandle. Total sample collected at one time is 300cm 3 approximately.

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Blaine Air Permeability Apparatus.

The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air Permeameter. Specifications: The apparatus consists one each of permeability cell 12.5cm I.D., Manometer 'U' type mounted on stand with a built in a stop cock, Perforated disc, Plunger Rubber stopper,Rubber tube 30cm long. Spares and accessories: Packet of 12 filter paper discs. Non-perforated disc. Suction bulb.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Lea and Nurse Air Permeability Apparatus.

The method and results obtained from this apparatus depend upon the rate at which air flows under a given pressure gradient through a bed of powder of known density and voids content, in order to determine the surface area of the individual particles.

Specifications: The complete equipment comprises of one Air permeability Cell Lea and Nurse type for areas 500 to 10000sq.cm/gm. Complete with perforated plate one capillary tube, one plunger for compaction of sample and a wooden case.

Accessories: Air source, Comprising one Pressure chamber fitted with a valve, regulator, connecting tube, a foot pump and two drying towers. Manometer liquid in 500 ml bottles.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Air Permeability Apparatus Rigden Type.

Comprises one air permeability cell for range 500 to 10000sq.cm/gm. The cell is complete with a perforated disc and a compacting plunger. The instrument is supplied with ‘U’ tube manometer having isolation tap assembly and a suction bulb. This apparatus is mounted in a wooden cabinet.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Vicat Needle Apparatus With Dashpot.
This instrument is used for determining the normal consistency and setting times of cement and 'A' Class limes. Specification: The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould, splittype and glass base plate and one set of needles one each initial needle, final needle and consistency plunger.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Le Chatelier Mould.

Same as above but in addition is fitted with a dash pot which facilitates gentle levering of the needles.

Accessories: Mild steel base plate 5inches x 5inches. Fulcrum mould, brass, 70mm 1.0 base die x 60mm I.D. top dia, 40mm height.

Note:

1) Normally set of needles and mould which meet IS requirements as per IS. 5513 are supplied. While ordering please specify the specification code of the instrument required.

2) Vicat needle apparatus for determining consistency of Hydraulic cement, gypsum plaster, lime etc.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Ring Mould.

Consists of mould 10cm. dia x 0.5cm. deep and a glass base plate


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Le Chatelier Flask.

Used for finding specific gravity of Hydraulic Cement. Made from Borosil glass. The flask is 243mm in total height, having a bulb of 90mm dia of 250ml approsimate capacity. The long neck of the flask has at top a funnel of 50mm dia in which fits a ground glass stopper. The neck hasover-all 11mm I.D. upper portion is graduated from 18ml to 24 ml with. 1ml graduation just at the bottom of the neck 1 ml capacity is marked in between there is 17ml capacity bulb.

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Gillmore Needle Apparatus.

This instrument is used for determining the time setting of hydraulic cement.

Specification:

A base with a vertical shaft and two horizontal arms. The lower arm is adjustable for height. 1 No.. Initial Needle 1/12 inch dia 1/4 lb.wt. 1No.Final Needle 1/12 inch dia. 1lb.wt. 1 No. Glass base plate. Complete as above.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Kelley Ball Penetration Apparatus.

The apparatus is used to determine the workability of Portland cement concrete. The Kelly Ball test is considered to be simple and much faster than the slump test. Twice the Kelly Ball reading approximately equals the slump.

Specifications: It consists of a cylinder with a ball-shaped bottom and handle together weighing 15 kg. A strip frame, guides the handle and serves as a reference for measuring the depth of penetration. The handle is graduated in MM. Penetration can be recorded to the nearest 0.5mm.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Ve Bee Consistometer.

The instrument is used for workability as well consistency of fresh concrete. A slump cone and a graduated rod supplied with the instrument helps the operator to find out slump values and Vibration Table with container and acrylic disc. Is used to find outwork-ability of concrete expressed in Vee Bee degrees, which is defined as the time in seconds to complete required vibrating at which the fresh concrete flows out sufficiently to come in contract of the entire face of acrylic disc.

Specifications: 


The equipment consists of: A vibration Table size 380mm long and 260mm wide, resting upon elastic support at a height of about 305mm above the floor, complete with start/stop Switch, Cord and Plug. A holder is fixed to the base into which a swivel arm is telescoped with funnel and guide sleeve. The swivel arm is also detachable from the vibrating Table. A graduated rod is fixed on a swivel arm and at its end a plastic disc is screwed. The divisions of scale on the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating Table. A slump cone open at both endswith lifting handles and a Tamping rod of size 16mm dia and 600 mm long, rounded at one end.

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Slump Test Apparatus.

It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm.
Specifications: The Apparatus consists of one slump cone with handles and foot pieces. The Slump cone has internal dimensions 20cm. dia. At base 10cm. top dia. And 30cm. height. Foot pieces can be fixed to the clamps on the base plate.The base plate has lifting handle for easy transportation. One graduated steel rod 16mm dia. x 600mm long, rounded at one end and graduated in mm, is also supplied.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Air Entrainment Meter.

As Entrainment of air in limited percentage improves durability of concrete and very low percentages, deteriorate it, measurement of air entrapped in freshly mixed concrete becomes important. The use of chemical additices to increase work ability of concrete requires an air content check to be made. Air Entrainment meters are used to determine air entrained in freshly mixed concrete by pressure method. Specifications: The apparatus consists of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter capacity of maximum size of aggregate 38mm. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a pet cock for bleeding of the water. A transparent cylindrical stand pipe which is graduated in air content is fixed to be conical cover assembly. Pressure is applied to the specimen with the help of a pressure bulb and the pressure is recorded on the pressure gauge which in mounted on the stand pipe. The whole assembly is mounted on a flat base. The instrument is supplied complete with one each following accessories. Calibration cylinder with spring, Trowel, Tamping Rod, Straight edge, Rubber mallet and measure.

Available Sizes :
A- Same as above but 0.007 cubic meter capacity for maximum size of aggregate 38mm.

B- Same as above but 0.01 cubic meter capacity for maximum size of aggregate 75mm.

C- Same as above but 0.1 cubic meter capacity for maximum size of aggregate 150mm. Space: Rubber pressure bulb with tube &Gasket for Vessel.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Compaction Factor Apparatus.

The apparatus is used for determining the work ability of fresh concrete, provided the maximum size of the aggregate does not exceed 38mm. The test is particularly useful for concrete mixes of very low work ability where true slump values are not reliable.  

Specifications:

It consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trap- doors having quick release catches. A circular meter plate is provided to cover the top of the cylinder. Supplied complete with one plaster's trowel and one tamping rod, 16mm dia. x 600mm long, one end rounded.

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Flow Table.

This is used for determining the work ability of building limes.

Specifications:
The Flow table consists of a 30cm. dia. ground and polished steel plate with three inscribed annular circles.7, 11 and 19cm. dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brasconical mould, 65mm I.D. at base and 40mm I.D. at top, height of the mould 90mm.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Flow Table

It is used for determining the flow of cement concrete.
Specifications: 
Consists of a steel table top 76.2cm (30 inch. Dia.), finely machined. The integral cast ribs are designed for support and strength. The stand is fabricated out of cast iron and is of study construction. Hole for mounting in foundations are drilled in the base plate. The ground and hardened steel cam is designed to lift and drop the table by 12.5mm. The hand wheel makes it simple to operate the table. Supplied with one conical mould with handles. 12cm. height having 17cm. top inernal diameter and 25cm. I.D. at the base complete with a tamping rod 16mm. dia x 600mm long one end rounded 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Flow Table Motorized.

Specifications: Same as above but electrically operated, to raise and drop the table top, approx. 15 times in 15 seconds. Suitable for operation on 230 Volts, 50 cycles, A.C. supply. 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Flow Table.

This is used for measuring the consistency of Pozzolanas and also cement mortar and hydrated lime. Specifications; It consists ofa machined brass table top 250+/-2.5mm. dia mounted on a rigid stand. The table top is reinforced with equally disposed ribs andallowed to conical brass mould 100mm I.D. top dia. and 50mm high.  


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Flow Table Motorized.

Specifications: Same as above but electrically operated. Fitted with a motor. Connected to the cam shaft through a reduction gear to give approximately 100rpm. Suitable for operation in single phase 230Volts, 50 Cycles, A.C. supply. 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Mortar Mixer.

It is used for mixing cement pastes, mortars and pozzolanas.
Specifications:
The apparatus consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion, by means of gears. It has two speeds of 140+5 r.p.m and 285+10 r.p.m with planetary motions of approximately 62 r.p.m and 125 r.p.m.+ 10 r.p.m. respectively. The stand of the mixer has arrangement to raise for lower the bowl. Complete with stainless steel bowl of about six liters capacity. Suitable for operation on 230 volts, 50 cycles, single phase, A.C. Supply.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Laboratory Concrete Mixer Motorized.

Concrete mixer Laboratory type, electrically operated. Designed to remove the burden some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1.1/2 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with 1/2h.p. electric motor. Suitable for operation on 220/230 volts A.C. Single phase.

Specifications:-

  • Size: Customized
  • Type: Electrical and Manual
  • Voltage:- 220 Volt
  • Brand:- ATICO

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Laboratory Concrete Mixer Hand Operated.

This is a hand Operated Concrete Mixer and is suitable to mix 1 cuf to 1.1/2 cft material. It is mounted on two rubber tired / stand.

Specification:

  • Power: Manually operated/1 H. P. single phase electric motor.
  • Chassis: Heavy duty, robust chassis in steel angles.
  • Mixing Drum: Made from 3.15 mm thick M.S. Sheets; mounted on taper roller bearings for smooth & easy operations.
  • Wheels: M.S. Wheels
  • Advantages: Compact size
  • Easy to shift from floor to floor
  • Any unskilled labour can operate
  • Totally manually operated, no power required
  • Special grease cups for lubrication
  • Parts easily detachable.
  • Dimensions: L750mmxW 1200 mm xH 1100 mm
  • Weight: 90kg.(Approx.)

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Laboratory Cement Autoclave With Stainless Steel Chamber.

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Laboratory Cement Autoclave With Stainless Steel Chamber.

The Autoclave is suitable for conducting accelerated soundness tests on cements of the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished.The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Inside Chamber Dimensions-10.5 diameter x40.5cm height suitable for operation on 230V,50Hz, Single Phase, A.C. Supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.
Note: Ordinary Laboratory Cement Autoclave with Mild Steel Chambers are also available.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Shrinkage Bar Mould.

The mould is used for casting specimens of cement aggregate combinations fro measuring the potential expansive alkali reactivity.
Specifications: The mould, which has 25mm x 25mmx 250mm. effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Shrinkage Bar Mould Two Gang.

Do as above but with two compartments assembled on a angle base plate.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Shrinkage Bar Mould Three Gang
Do as above but three compartments.

We are highly indulged in presenting a highly efficient range of Shrinkage Bar Mould. Our finely made moulds are obtained from all quality embedded components to present best grade in our supplied perfectly configured products. Experts of our unit inspect all shrinkage moulds on numerous levels during processing to ensure reliability for longer life functioning. Precisely engineered all shrinkage moulds are durable in nature.

Features:

  • Long Life
  • Superior performance
  • Sustain

Specification:

  • Type: Electrical
  • Size: Customized
  • Brand:- ATICO

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Shrinkage Bar Mould Four Gang.

Do as above but four compartments.
Note: Bar mould as above but in gun metal as well as with knurled and threaded reference pins are also available.
Spares: Stainless steel smooth or knurled and threaded reference pins as required. Supplied in packs of one dozen.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Standard Spatula.
This is for use while casting a cement briquette,

Specifications: The standard spatula consists of a steel blade, of a special shape. A wooden handle is fixed to the stem of blade.The weight does not exceed 340gms.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Gauging Trowel.

Specifications: Weight approximately 210gm. Best quality with hardwood handle Blade length approx. 200mm.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Demountable Mechanical Strain Gauge.

It is used for finding out the linear deformation caused on two reference points fixed on a loading member.


Specifications:

This portable gauge is designed for a gauge length of 20c.m of the reference pins. The deformation is indicated by a 0.002 x 10mm dial gauge attached to the instruments. Complete with two standard bars for 20cm gauge length supplied in a wooden case.

Accessories: Reference pins in packet of 100 Nos.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Lateral Extensometer.

This is for determining the lateral extension of 15 cm dia. x 30cm high cement concrete cylinders while testing them under compression.

Specifications:
The unit consists of two movable frames pivoted at one end. The extensometer is fixed to the specimen with the help of tightening screws. The lateral extension is indicated on a dial gauge of .002mm x 12mm travel. The extension is magnified 2.5 times and the dial gauge readings are to be divided by 2.5 to get the exact read-ings. A spacer strip is provided to initially set the dial gauge, and can be removed after initial setting. Supplied in a wooden carrying case.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Longitudinal Compressometer.

It is designed for finding out the deformation and strains on 15cms. Diameter and 30cms high cement concrete cylinders when subjected to compressive loads. Specifications: Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compressometer over the cylinder. A dial gauge .002mm x 12mm is mounted on the upper ring andthe tip of the dial gauge rests on an anvil. The zero of the dial gauge can be set by adjusting the anvil screw. Supplied ina wooden carrying case. 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Length Comparator.

It is used to measure the drying shrinkage of concrete autoclave expansion of Portland cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying. Specifications: The instrument consists of a chanelled base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial guage, reading to.002mm x 12 mm. can be fixed to the top cross plate. The plunger end of the dial gauge can be located upon a 6.5mm. dia. ball orother reference cemented in the specimen. On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standardization bar with insulated grip and with 6.5mm dia. balls mounted in the ends. The unit can be supplied with a .0001inch x 1/2inch dial gauge at extra cost if indicated at the time of placing the order.

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Volume Change Apparatus.

The Instrument is used for determining the volume change of cement concrete. Specifications: The apparatus comprises of onemould 100mm x 100mm x 250mm, effective gauge length complete with base plate, Four reference pins, One length comparator frame, One stainless steel reference bar with insulated grip, and one dial gauge, 0.02mm x 10mm.

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Sand Absorption Cone And Tamper.

Used for determining the slumps of fine aggregate in the determination of bulk and apparent specific gravity and absorptionof fine aggregate.   
Specifications:

The Equipments comprises of a conical metal mould 1.5inch dai. at the top, 3.5 inch dia. at the base and 2.7/8 inchin height. A metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 inch in diameter.

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Jolting Apparatus.

For making standard rectangular specimens of 40 x 40 x 160mm. of Portland and pozzolana cement mortal for determiningthe transverse strength.

Specifications:
The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800mm from the center of the table. There is a projecting lug with a plane face on the ower face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gear box through a V-beltand pulleys. The cam rotates at a rate of 60 rev./min. A stroke counter fitted with micro-switch is provided which stop the machine after 60 jolts. Locating pins are provided formounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, single phase, A.C. supply. Spares andAccessories: (1) Steel mould with base platehaving three compartments each having (2) Apparatus for demoulding the specimen.

 

 

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Flexure Testing Machine (Motorized) Rilem- Cembureau Test.

It is used for testing 40mm x 40mm x 160mm mortal specimens for flexural strength. (Rilem- Cembureau Test) by single pointed loading.

Specifications: It is a motorized, mechanical unit. The speed is adjusted so that the load increase on the specimen is between4 to 6kg/sec. A flexure test attachment for keeping the specimen in position is also supplied. This consists of two rollers 10mm. diameter and spaced 100mm apart, and a third roller of the same diameter equidistant from 10mm. diameter and spaced 100mmapart, and a third roller of the same diameter equidistant from the first two and for transmitting the applied load to the oppositeface of the prism. The unit is for operation on 230 Volts, single phase, 50 cycles A.C. Supply. Loads are measured on a provingring fitted with a sensitive dial gauge. Supplied without proving Ring. Accessory: Proving Ring, Capacity 500Kn.

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Tamping Rod.

This is used for compacting concrete into cube moulds. This rod is made of steel. It is 16mm diameter, 60mm in length and rounded or bullet shaped at one end.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Compaction.
When compaction of soil in the field is done using rolling machines. It is important to know O.M.C. and M.D.D. values. Standard compaction test is used to determine is Laboratory Optimum Moisture Contents (O.M.S.) and Maximum Dry Density (M.D.D) for soils, which represents field samples. Compacted soils have increasing use in embankment of dams, highways, railways etc. In recent years in order to meet current heavy traffic on runways and highways. Heavy duty field compacting equipment has come into use and in view of reproducing greater densities, heavy compaction tests using heavy compaction apparatus have been developed.

Area Of Application :-

  • Vernier Transit Theodolite
  • Quick Set Dumpy Level
  • Leveling Staff
  • Plane Table
  • Prismatic Compass
  • Ranging Rod
  • Measuring Survey Chain
  • Cross Staff
  • South Automatic Level
  • Automatic Level
  • Metallic Tape
  • Micro-optic Theodolite
  • South Total Station
  • Vicat Needle Apparatus
  • Le-chatelier
  • Aggregate Crushing Value Test Apparatus
  • Aggregate Impact Tester
  • Compaction Factor Apparatus
  • Sieves
  • Auto Level with Tripod Stand
  • Theodolite

Specifications:

  • Determine: O.M.C. and M.D.D. values.  
  • Colour: Blue
  • Type: Laboratory Equipment

Send Bulk Enquiry
 
X

Download Brochure
Advanced Technocracy Inc.

Kunal Chopra (CEO)
ATICO House, 5309 Grain Market, Near B. D. Senior Secondary School Aticoindia@gmail.com
Ambala - 133001
Haryana, India
Send Email
© Advanced Technocracy Inc.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited