Advanced Technocracy Inc.
Grain Market, Ambala, Haryana
Send E-mail
Send SMS
Home»Our Products»

Digital pH Meter

We are a leading Exporter of double effect evaporator, packed distillation column, spray extraction column, bed type solid liquid extraction packed, fluidized bed heat transfer unit and ph meter from Ambala, India.

REQUEST CALLBACK
Ask Latest Price

Double Effect Evaporator

Technical Description:

Evaporation deals with the concentration of a non-volatile solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing apart of the solvent, use ful product i.e. the concentrated solution or thick liquor is produced and the vapour is discarded. Long tube evaporators are usually used for the concentration of foamy liquids. The set-up is consist soft evaporators fitted in series. Each is made up of Stainless Steel tubes surrounded by a Stainless Steel jacket and fitted with accumulator. Dilute solution is feed to the first evaporator. Steam from a steam generator is supplied to evaporator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected attheend of trap. The vapour so volatile solvent produced in first evaporator are supplied to the second evaporator. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator is recycled through the evaporator.

Learning Objects/Experimentation:

  • To concentrate a solution and to evaluate the following at steady state:
  • Material and Heat Balance.
  • Economy and the capacity of the evaporator for different feeding arrangement.
  • Overall heat transfer co-efficient.

Requirement For Operation:

  • Water supply 10lit/min(approx.)
  • Floor Drain
  • Electricity Supply:1 Phase, 220 V AC, 3-6 kW.
  • Air Compressor ½ HP, 2 CFM for compressed air supply.
  • Required Chemicals.

Technical Specification:

  • Evaporator (1st) : Shell Dia-75mm, Length-500mm, Made of Stainless Steel
  • Tubes Dia -12mm,Length-500mm
  • Evaporator(2nd) : ShellDia-75mm,Length-500 mm, Made of Stainless Steel
  • Tubes Dia -12mm, Length-500mm
  • Feed Tank : Material Stainless Steel, Capacity 30 Ltrs.
  • Flow measurement : Rota meters(One each for feed & coldwater).
  • Steam Generator : Made of Stainless Steel provided with Pressure Gauge &Level
  • Indicator, Safety valve and drain etc. & insulated with ceramic wool and cladding with Aluminium foil.
  • Piping : Stainless Steel and PVC, size ¼”.
  • Condenser : Shell & Tube type made of Stainless Steel.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Packed Bed Distillation Column Apparatus

Technical Description:
  • The column is made of Stainless Steel material packed with Borosilicate Glass rasching rings. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form the top of column are condensed in the shell and tube type condenser by circulating cooling water, supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is provided for pressure & temperature measurement wherever necessary.
Learning Objectives/Experiments:
  • To estimate the batch distillation curves for a binary system and verify the binary batch distillation equation for a known packed height.
  • To operate the column under total reflux condition and estimate the HETP for the packing.
Required for Operation:
  • Water Supply 2 LPM at 5 m head.
  • Electricity Supply: 1 Phase, 220 V AC, 6.5 kW.
  • Required Chemicals.
  • Refractometer for analysis.
Technical Specifications:
  • Distillation Column: Material Stainless Steel, Dia 80mm, Length 900mm (approx).
  • Packing Material: Borosilicate Glass Rasching Rings.
  • Pressure Gauge: Bourdon type
  • Rotameter: For cooling water flow rate measurement.
  • Steam Generator: Made of Stainless Steel, provided with Pressure Gauge Level Indicator, Safety Valve & insulated with ceramic wool and Cladding with Aluminum foil.
  • Reflux Divider: Special arrangement to change R/D ratio automatically.
  • Condenser: Shell & Tube type made of Stainless Steel.
  • Distillate tank: Made of Stainless Steel, capacity 5Ltrs.
  • Heaters: Made of Stainless Steel, capacity 5Ltrs. Nichrome wire heater.
  • Temperature Sensors: RTD PT-100 type
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.
Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9°C, For Re-boiler.
  • Digital Temp. Indicator 0-199.9oC, with multi-channel switch.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Spray Extraction Column

 

Features:

  • Used extensively
  • Smooth performance
  • Longer operational life
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
Advanced technocracy inc. Is preparer, & of solid liquid extraction packed bed type.

Technical description:
  • This setup is designed to study the performance characteristics of solvent extraction of a particular component from a packed bed of solid material. The apparatus allows study of such systems as water/inorganic salts, water/sugar bed, ethylene chloride/vegetable oil etc. The glass column is fitted with ss mesh to support the solid material. The solvent is introduced near the bottom of the column and it flows upward counter-currently to the solids. A pump supplies the solvent and flow rate is monitored by means of a rota meter. Solvent feed tank is kept in a bath fitted with heater and digital temperature controller is used to maintain the constant temperature.
Learning objectives/experiments:
  • To study the effect of various system parameters like, solvent temperature, solvent rate and particle size on the %age recovery of oil from solid.
  • Required for operation:
  • Electricity supply: 1 phase, 220 v ac, 1.5 kw.
  • Solvent: 30ltrs.
  • Solid: 10kg
  • Table for setup support.
Technical specifications:
  • Extraction column: material borosilicate glass.
  • Solvent flow measurement: rota meter.
  • Solvent tank: made of stainless steel, capacity 30 ltrs. Double wall.
  • Solvent circulation: magnetic pump made of polypropylene to circulate solvent.
  • Heater: nichrome wire heater
  • Temperature sensor: rtd pt-100 type.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.
Control panel:
  • Standard make on/off switch, mains indicator etc.
  • Digital temp. Controller: 0-199.9°c (for hot water bath)
Scope of delivery:
  • 1 self-contained “solid - liquid extraction (packed bed type)” apparatus
  • 1 instruction manual consisting of experimental procedures, block diagram etc.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Fluidized Bed Heat Transfer Unit

 

Technical Description:

The set up consists of a glass column filled with and. Air is fed at the bottom of the column. Flow rate of air is measured using orifice meter and manometer. A heater in the form of cylinder is placed in the bed to heat the .The heater input can be controlled by the Digital Temperature Controller. Temperature sensors are provided to measure the temperature of air in let and air outlet.

 

Learning Objects/Experimentation:

To calculate heat transfer coefficient of the fluidized bed.

 

Requirement For Operation:

  • Compressed Air Supply: 2Bar, 1 CFM
  • Electricity Supply: 1 Phase, 220 V AC, 50 Hz,5 Amp.
  • Bench Are a Required : 1m x 0.75m

 

Technical Specification:

  • Column : Material Borosilicate Glass
  • Heater : Made of Nichrome Wire
  • Air Flow Measurement : By Orifice meter & manometer
  • Control panel comprising of
  • Digital Temp. Controller : 0 to 199.9°C
  • Digital Temp. Indicator : 0 to 199.9°C,with multi channel switch Temperature sensors : RTDPT-100 type-3Nos.
  • With standard make on/off switch, Mains Indicator etc.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
ApplicationLaboratory
BrandAtico
Brand/MakeATICO
ConditionNew
Dimensions80 mm (H) x 235 mm (W) x 150 mm (L)
Meter Weight1 Kg (approx.)
Power230 V AC 10% 50 Hz, 4 VA
Power (Volt)230 V AC 10% 50 Hz, 4 VA
Range0 to 14.00
Size (inches)80 mm (H) x 235 mm (W) x 150 mm (L)
Temperature (Degree Celsius)0 to 100 degree C
Temperature Compensation0 to 100 degree C
TypeDigital
Weight (Kilogram)1 Kg (approx.)
pH Range0 to 14.00
Description:
The pH meter measures the difference in electrical potential between a pH electrode and a reference electrode, and so the pH meter is sometimes referred to as a "potentiometric pH meter". The difference in electrical potential relates to the acidity or pH of the solution.The pH meter is used in many applications ranging from laboratory experimentation to quality control.

Specification:
  • Type Digital
  • pH Range 0 to 14.00Electrode Combined PVC sleeved
  • Dimension 80 mm (H) x 235 mm (W) x 150 mm (L)Temp. comp. 0 to 100 degree C
  • Power required 230 V AC 10% 50 Hz, 4 VA
  • Weight 1 Kg (approx.)Warming time 5 minutes
  • Body Structure ABS
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Mass Transfer With And Without Chemical Reaction Solid Liquid Systems.

The setup consists of a Reactor, in which solid cylinder of Benzoic Acid is placed and is stirred by means of a variable speed mixer. Baffles are also provided. The Reactor is made of Stainless Steel. Peltilizer is provided to make the solid cylinder of Benzoic Acid. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures.

EXPERIMENTATION:

Dissolution of Benzoic acid in water: Kinetic studies

Dissolution of Benzoic acid with reaction in aqueous NaOH solution.

UTILITIES REQUIRED :

  • Water Supply.
  • Drain.
  • Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.
  • Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

TECHNICAL DETAILS :

  • Reactor : Material Stainless Steel, Capacity 2 Ltrs. (approx)
  • Water Bath : Material Stainless Steel, Double Wall,nsulated with ceramic fibre wool.
  • Heater : Nichrome Wire Heater
  • Stirrer : Stainless Steel Impeller and shaft coupled with DC motor drive for variable speed.
  • Temperature Sensors : RTD PT-100 type. Control panel comprises of :
  • RPM Indicator : Digital, Non contact type. Digital Temp. Controller : 0-199.90C for hot water tank. With Standard make on/off switch, Mains Indicator & fuse etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus
  • The setup is provided with Peltilizer.
  • The whole unit is assembled rigidly on a base plate.
  • The whole setup is well designed and arrangement in a good quality painted structure.

 

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
Advanced technocracy inc. Is preparer, & of liquid - liquid extraction in packed bed.

Technical description:
  • The set-up consists of a glass column packed with r aching rings. Continuous counter current contacts between the solvent and solute phases is made, which results into extract and raff in streams. Flow meters (rota meters) are used to note the flow of solvent & solute respectively .The continuous and dispersed phase streams are metered and derived from separate containers. The total set-up is housed in a well- designed rigid structure. The structure also supports tanks, piping, rota meters, and panes land other units.
Learning objects/experimentation:
  • To determine over all mass transfer co-efficient based on continuous & dispersed phase.
  • To determine individual “height of transfer unit” based on continuous & dispersed phase.
  • Requirement for operation:
  • Compressed air supply at 2 bar, 0.5 cfm.
  • Water supply
  • Floor drain.
  • Required chemicals & laboratory glassware.
Technical specification:
  • Extraction column : material borosilicate glass, dia 55 mm, height 750mm(approx).
  • Packing : rasching rings, material borosilicate glass,
  • Feed tanks : material stainless steel, cap. 20 ltrs. (2 nos.)
  • Extract & raffinate tanks: material stainless steel, cap 10 ltrs.
  • Feed circulation : by compressed air.
  • Pressure regulator : 0-2 kg/cm2.
  • Pressure gauge s: bourdon type, 0-2 kg/cm2.
  • Flow measurement : rota meters (one each for solvent & solute)
  • Special arrangement for changing height of interface zone is done.
  • An english instruction manual consisting of experimental procedures, block diagram etc.Will be provided along with the apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial pu paint.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
Brand/MakeATICO

Steam Distillation Set Up

 

The equipment consists of jacketed pressure vessel for distillation. Steam from a steam generator can either be allowed to enter ‘in the outer jacket or in the vessel. The vapors form the top of the vessel are condensed in the shell and tube type condenser by circulating cooling water supplied by laboratory overhead tank.

 

The condensate is collected in a separating chamber. The set-up is fitted with steam trap control valves pressure gauge, temperature sensors and other instrumentations required

 

Experiment:

To study the Packed Distillation Column

 

Feature:

Stainless Steel tanks and wetted parts

Superb Painted structure

Simple to operate & maintain

Compact & stand alone set up

 

Utilities Required:

Water Supply 2 LPM at 5 m head

Drain

Electricity Supply: 1Phase, 220 V AC, 6.5 kW

Required Chemicals

Refractrometer for analysis

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Adsorption in Packed Bed.

Technical Description:

The set up consists of a glass column packed with Reaching rings. Liquid is fed at the top of the column through distributor. The solute gas and air are measured separately, mixed in a mixing chamber and then passed through the packed column vertically upward and absorbed in liquid. All the flow rates can be independently varied to simulate different conditions. Liquid sample can be taken out from the sampling point at the bottom of the column for analysis.

 

Learning Objectives/Experiments: 

  • To determine the number of transfer units, Height of transfer unit and overall mass transfer co-efficient for the given system.

Required for Operation:

  • Compressed Air Supply at 2 Bar, 4 CFM.
  • Water Supply.
  • Floor Drain.
  • CO2 cylinder with control valve, pressure regulator and Pressure gauges.
  • Required Chemicals & Laboratory Glassware.

Technical Specifications:

  • Column : Borosilicate Glass Dia. 55 mm, Length 750mm (approx.)
  • Packing : Borosilicate Glass Reaching Ring
  • Feed Circulation: By compressed air.
  • Pressure Regulator: 0-2 kg/cm².
  • Pressure Gauge : Bourdon type
  • Feed Tank: Material Stainless Steel, Capacity 20 Ltrs.
  • Flow measurement: Rota meters (One each for feed, air & CO2).
  • Collecting Tank: Material Stainless Steel, Capacity 10 Ltrs.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

Control Panel:

  • Standard make On/Off switch, Mains Indicator etc.

 

Scope of Delivery:

  • 1 Self-contained “ABSORPTION IN PACKED BED Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

 

 

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Solid In Air Diffusion Apparatus  

 

The set up consists of glass column, packing material, air rotameter and piping. Metered quantity of airflow is passed through the packed bed vertically upwards.

 

The flow rate can be independently varied to simulate different conditions using rotameter. Naphthalene balls of known weight and diameter are used to form the packed bed for the calculation of mass transfer co-efficient of vaporization in air

 

Experiment:

  • To calculate the mass transfer co-efficient of vaporization of naphthalene in air using a packed bed of spherical particles of naphthalene
Feature :
  • Superb Painted structure
  • Simple to operate & maintain
  • Compact & stand alone set up
Utilities Required :
  • Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for Mini Air Compressor
  • Chemicals for trial Naphthalene Balls (Or as per your choice)
  • Air supply: Clean, oil and moisture free air, pressure 2 Bar
  • Weighing Balance 0.1gm resolution
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Experimental Water Cooling Tower Apparatus

Technical Description:

Experimental water-cooling tower is a forced draft counter flow type cooling tower specially designed for the Engineering students to provide them insight about actual working of tower. In this system, air from a fan enters at the bottom of the tower and after passing through the mesh packing, discharges into the atmosphere via a duct. Airflow is controlled by a butterfly valve on the blower's delivery line. Water is evenly distributed over the packing by nozzles at top of the tower. Water flow and temperatures can be measured and controlled with suitable instrumentation provided. A water tank at the bottom fitted with level gauge enables to show the exact evaporation loss. Front side acrylic sheet provides actual visualization of cooling tower operation. Air and water flow rates as well as inlet water temperatures can be varied to have different sets of readings.

 

Learning Objectives/Experiments:
  • Actual visualization of the cooling tower operation.
  • To determine the mass transfer coefficient
Required for Operation:
  • Water Supply & Drain.
  • Electricity Supply : 1 Phase, 220 V AC, 3 kW.
  • Floor area of 1.2 m x 1m
Technical Specifications:
  • Tower: Material Stainless Steel Size-Cross-Section 150x 150mm,Height 750mm
  • Packing: Expanded wire mesh.
  • Air Circulation : By forced draft fan, arrangement is done to vary the air flow rate.
  • Air Flow Measurement: Orifice meter with U-tube manometer.
  • Flow Measurement: Rotameter.
  • Dry & Wet Bulb Temperature: Measured by Temperature Sensors insulated with ceramic fibre wool.
  • Hot Water Tank: Material Stainless Steel, Double wall,
  • Hot water circulation: Magnetic Pump
  • Heater: Nichrome wire heater
  • Temperature sensors : RTD PT-100 type 6 Nos.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.
Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • 0-2000C, for hot water tank.
  • 0-199.90C, with multi-channel switch
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
ConditionNew
Resolution (Ph)0 to 14 pH x 0.01 pH
TypeDigital
Type of PH MeterPortable
Water ProofYes

Description:
Portable pocket pH monitors are ideal for measuring the pH levels of water from 0-14 pH range. Their compact size makes them ideal for use on the go.
Testing is fast and easy: Simply turn on the meter, immerse it into the solution to be tested, stir gently, and wait for the pH reading to stabilize.
Pocket pH Testers offer a simple, inexpensive solution for accurate pH measurement.

Specification:

  • Type Digital
  • Type of PH Meter Portable
  • Range/Resolution 0 to 14 pH x 0.01 pH
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
ConditionNew
Dimension (millimetre)70 mm (H) X 160 mm (W) X 115 mm (L)
Display Type16 X 2 alpha numeric LCD display, 3 and half Digit LED display
Power9 V battery
Size70 mm (H) X 160 mm (W) X 115 mm (L)
Weight800 gm approx
Specification:
  • Function: pH, conductivity and temp.
  • Power required: 9 V battery
  • Warming time:- Instant
  • Weight: 800 gm. (approx.)
  • Body: ABS
  • Dimension: 70 mm (H) x 160 mm (W) x 115 mm (L)
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
ConditionNew
Dimensions80 mm (H) x 235 mm (W) x 150 mm (L)
Power (Volt)230 V AC 10% 50 Hz, 4 VA
Sensor5 minutes
Temperature (Degree Celsius)0 to 100 degree C
TypeHand-Held
Type of PH Meter Hand-Held
Weight (Kilogram)1 Kg (approx.)
pH Range0 to 14.00
Description:
pH Resolution: 0.1 pH
pH Accuracy: ±0.1 pH
pH Calibration manual, two points
Battery Type/Life: 1.5V (4) / approximately 700 hours of continuous use

Specification:
  • Type: Digital
  • pH Range: 0 to 14.00
  • Electrode: Combined PVC sleeved
  • Dimension: 80 mm (H) x 235 mm (W) x 150 mm (L)
  • Temp. comp.: 0 to 100 degree C
  • Power required: 230 V AC 10% 50 Hz, 4 VA
  • Weight: 1 Kg (approx.)
  • Warming time: 5 minutes
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
ApplicationLaboratory
BrandAtico
ConditionNew
Display16 x 2 alpha numeric LCD display
Display Type16 x 2 alpha numeric LCD display
Sensor5 minutes
TypeTable-Top
Type of PH Meter Table-Top

Description:
The leading technology we have incorporated in this equipment results in accurate measurement of pH balance. Widely demanded in pharmaceutical, chemical, and food and beverage industry, this digital pH meter is available at a competitive price for our prestigious clients. 

Features:
•Sleek design
•Accurate results
•Digital display

Specification:

  • Display Type 16 x 2 alpha numeric LCD display
  • Type Table-Top
  • Weight 1 Kg (approx.)
  • Warming time 5 minutes
  • Temp. comp. 0 to 100 degree C
  • Power required 230 V AC 10% 50 Hz, 4 VA

 

Send Bulk Enquiry
X
 

Download Brochure
Explore more products
Multiprocess Trainer
Get Best Quote
Aggregate Impact Tester
Get Best Quote
Antennas
Get Best Quote
Acrylic Lenses
Get Best Quote
Advanced Technocracy Inc.

Kunal Chopra (CEO)
ATICO House 5309, Grain Market, Near B.D. Senior Secondary School
Ambala - 133001
Haryana, India
Send Email
© Advanced Technocracy Inc.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited