Advanced Technocracy Inc.
Grain Market, Ambala, Haryana
Send E-mail
Send SMS
Home»Our Products»

Fluid Mechanics Lab Instrument

Our product range includes a wide range of venturimeter & orificemeter test rig, bend meter test rig, forced vortex apparatus, impact of jet vanes apparatus, laminar flow table and reynold apparatus.

REQUEST CALLBACK
Ask Latest Price

Technical Description:

The apparatus consists of two pipelines emerging out from a common manifold.  One pipe line contains a Venturimeter and other contains an Orifice. The pressure tapings from the Venturimeter and orifice meter are taken to differential manometer to measure pressure difference. The Venturimeter and Orifice meter are connected in parallel and any one of them can be put in operation by operating valves provided at the downstream. The flow can also be regulated by these valves.  Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

 

LEARNING OBJECTS/EXPERIMENTATION:

  • To demonstrate the use of Venturimeter & Orifice meter as flow meters.
  • To determine co-efficient of discharge through Venturimeter and Orifice meter.
  • Electricity Supply: Single Phase, 220V AC, 50 Hz, 5-15 amp combined socket with earth connection.

 

Requirement FOR OPERATION:

  • Water Supply (Initial Fill).
  • Floor Drain Required.
  • Floor Area Required: 1.5 x 0.75 m
  • Mercury (Hg) for manometer (250 gm).

 

TECHNICAL SPECIFICATION:

  • Venturimeter: Material Clear Acrylic compatible to 1” Dia. Pipe.
  • Orifice meter : Orifice plate made of Stainless Steel and housing made of Clear
  • Acrylic compatible to 1” Dia. Pipe.
  • Water Circulation: FHP Pump, Crompton make.
  • Flow Measurement: Using Measuring Tank with Piezometer (Capacity 25 Ltrs.)  and Electronic Stop Watch
  • Sump Tank: Capacity 50 Ltrs.
  • Control Panel Comprises of:
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

 

Control Panel: 

  • Standard make on/off switch, Mains Indicator etc. 

 

Scope of Delivery: 

  • 1 Self-contained “VENTURI METER & ORIFICE METER TEST RIG” Apparatus 
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Technical Description:

The apparatus consists of a pipeline that contains one Bend meter. The pressure tapings from the Bend

meter is taken to differential manometer to measure pressure difference. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

 

LEARNING OBJECTS/EXPERIMENTATION:

  • To demonstrate the use of Bend meter as flow meter.
  • To determine co-efficient of discharge for given Bend meter.

 

REQUIREMENT FOR OPERATION:

  • Electricity supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill).
  • Floor Drain required.
  • Floor Area required:  1.5 m x 0.75 m
  • Mercury (Hg) for manometer (250 gm).

 

TECHNICAL SPECIFICATION:

  • Bend meter  : Material Stainless steel Compatible to 1” Dia. Pipe.
  • Water Circulation : FHP Pump, Crompton make
  • Flow Measurement : Using Measuring Tank (Capacity 25 Ltrs. (approx.))
  • and Electronic Stop Watch
  • Sump Tank : Capacity 50 Ltrs. (approx.)
  • Control Panel Comprises of :
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

 

Control Panel: 

  • Standard make on/off switch, Mains Indicator etc. 

 

Scope of Delivery: 

  • 1 Self-contained “BEND METER TEST RIG” Apparatus 
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

 

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of free & forced vortex flow apparatus.

Technical description:
  • The experimental set up consist of a circular transparent cylindrical tank in which plate is rotated with the help of a variable speed motor so that the cylinder rotates about its vertical axis with the help of a v belt and forced vortex is formed. An upper probe can be transversed horizontally & vertically across full diameter of the vessel so that water surface profile can be measure. Both axes contain graduations so that exact position of the probe is known. The experimental procedure involves measurement of the resulting free surface that represents the variation of the sum of the pressure head and datum head. An arrangement is provided to drain the vessel.
Learning objects/experimentation:
  •  To plot the surface profile of a forced vortex by measurement of the surface profile coordinates.
Requirement for operation:
  •  Electricity supply: single phase 220 v ac, 50 hz, 5-15 amp socket with earth connection.
  •  Water supply (initial fill).
  •  Drain required.
  •  Floor area required: 1 m x 1 m.
Technical specification:
  •  Cylinder: material acrylic. Dia. 200 mm (approx.)
  •  Height: 200mm approx.
  •  Motor: variable speed, dc motor, compatible capacity.
  •  Control panel comprises of :
  • Speed control unit, standard make on/off switch, mains indicator, etc.
  •  Instruction manual : an english instruction manual will be provided along
  • With the apparatus
  •  The whole set-up is well designed and arranged in a good quality painted structure.
Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “forced vortex apparatus” apparatus
  •  1 instruction manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Impact of Jet Vanes.

Technical Description:

The setup consists of a clear Acrylic fabrication section. Water is fed through  a nozzle and discharged vertically to strike a target carried on a stem, which  extends through the cover. A weight carrier is mounted on the upper end of  the stem. The dead weight of the moving parts is counter balanced by a compression spring. The vertical force exerted on the target plate is measured for applied weights. Two targets cups are provided with the setup (flat plate and hemispherical cup).

 

LEARNING OBJECTS/EXPERIMENTATION:

  • To measure the force developed by a jet of water upon a target (Hemispherical cup or Flat Plate) and
  • Comparison with the forces predicted by the momentum theory.

 

REQUIREMENT FOR OPERATION:

  • Water Supply.
  • Drain.
  • Electricity 0.5 kW, 220V AC, Single Phase.
  • Floor Area 1.5 x 0.75 m.

 

TECHNICAL SPECIFICATION:

  • Target (2 Nos.) : Flat Plate and Hemispherical Cup
  • Nozzle  : Material Brass
  • Jet Enclosure : Made of Acrylic
  • Water Circulation : FHP Pump, Standard make
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 25 Ltrs.
  • Sump Tank: Capacity 50 Ltrs.
  • Stop watch: Electronic.
  • Control Panel Comprises of :
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure

Control Panel: 

  • Standard make on/off switch, Mains Indicator etc. 

 

Scope of Delivery: 

  • 1 Self-contained “IMPACT OF JET ON VANES” Apparatus 
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Technical description:
  • The present set-up is designed to visualize the ideal flow around immersed body. It consists of a flow
  • Table in which flow of water is circulated in between two transparent sheets with a small gap between them. Water is supplied to the table and a colored dye is injected in the inlet of flow at different location. Water from the sump tank is pumped by a centrifugal pump to a calming section for table and after passing through transparent sheet it goes to sump tank. By-pass and flow control valves are provided to regulate the flow.Flow is made laminar by operating inlet control valve for water and it is visualized due to transparent sheet and colour. A small capacity dye tank will be provided for the flow of dye in fluid inlet stream. Any obstacle can be placed between the sheets and change in flow pattern can be visualized. Obstacles of different types will be supplied with the apparatus.
Learning objects/experimentation:
  •  To visualize the ideal flow around the immersed bodies of different types.
Requirement for operation:
  •  Electricity supply: single phase, 220 v ac, 50 hz, 5-15 amp combined socket with earth connection.
  •  Water supply (initial fill).
  •  Floor drain required.
  •  Floor area required: 1 m x 0.5 m.
  •  Chemical required: dye (kmno4) – 10 gm
Technical specification:
  •  Flow table
  •  Length : 750 mm (approx.)
  •  Width : 500 mm (approx.)
  •  Material : stainless steel
  •  Transparent sheets : material glass/acrylic (qty: 2 nos.)
  •  Water circulation : fhp pump champion/ godrej make.Sump tank
  •  Capacity : 40-50 ltrs
  •  Material : stainless steel
  •  Dye vessel
  •  Capacity: 1 ltrs
  •  Material : stainless steel
  •  Instruction manual : an english instruction manual will be provided along
  •  With the apparatus
  •  The whole set-up is in well designed and arranged in a good quality painted structure.
Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “laminar flow table” apparatus
  • 1 instruction manual consisting of experimental procedures, block diagram etc

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Technical Description:

The apparatus consists of a glass tube with one end having bell mouth entrance; connected to a constant head water tank, at the other end a valve is provided to vary the flow rate. The tank is of sufficient capacity to store water. A capillary tube is introduced centrally in the bell mouth for feeding dye from a small container placed at the top of tank, through polythene tubing. By varying the rate of flow, the Reynolds’s number is changed. This also changes the type of flow. Visual observation of dye (Thread) will indicate the type of flow, which can be confirmed from the Reynolds’s number computed. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line. Flow rate of water is measured with the help of measuring cylinder and stop watch.

 

LEARNING OBJECTS/EXPERIMENTATION:

  • To determine the Reynolds’s number and hence the type of flow either laminar or turbulent.
  • To study transition zone.

 

REQUIREMENT FOR OPERATION:

  • Electricity Supply: Single Phase 220 V AC, 50Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill).
  • Floor Drain required.
  • Floor Area Required: 1.5 m x 0.75 m

 

TECHNICAL SPECIFICATION:

  • Chemical Required: Dye (KMnO4) - 10 gm
  • Tube : Material Borosilicate Glass
  • Dye vessel : Material Stainless Steel, Suitable Capacity
  • Capillary Tube: Material Copper/Stainless Steel.
  • Constant Head Water Tank: Capacity 40 Ltrs.
  • Water Circulation: FHP Pump, Champion/godrej makes.
  • Flow Measurement: Using Measuring Cylinder.
  • Sump Tank: Capacity 60 Ltrs.
  • Stop Watch: Electronic.

Control Panel Comprises of :

  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

Control Panel: 

Ø  Standard make on/off switch, Mains Indicator etc.

Scope of Delivery: 

Ø  1 Self-contained “REYNOLD’S APPARATUS” Apparatus

Ø  1 Instruction Manual consisting of experimental procedures, block diagram etc.

 

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of cavitations apparatus.

Technical description:
  • The apparatus has been designed to demonstrate the phenomena of cavitation. The present set-up
  • Consists of a test section made of acrylic having conversion and diversion section. Pressure tapings at appropriate position are provided. This test section is having one control valve at upstream side to regulate the water flow rate. Two pressure gauges are connected to these taping which give the pressure readout at the time of flow passing through this test section. The unit is self-contained close circuit type with sump tank, measuring tank and centrifugal pump. Flow through test section can be regulated with the help provided by-pass and control valve.
Learning objects/experimentation:
  •  To observe the phenomena of cavitation.
  •  To compare the theoretical and actual pressures at cavitation condition.
  • Requirment for operation:
  •  Water supply: initial fill.
  •  Floor drain required.
  •  Floor area required: 1.5 m x 1 m.
Technical specification:
  •  Test section : material acrylic
  •  Pressure gauge: 0-4 kg/cm2
  •  Vacuum gauge: 0-760 mmhg
  •  Water circulation: by pump crompton make.
  •  Flow measurement : measuring tank (capacity : 40 liters) & electronic stop watch
  •  Sump tank : capacity : 60 liters
  •  Control panel comprises of :
  •  Standard make on/off switch, mains indicator, etc.
  •  Instruction manual : an english instruction manual will be provided along
  •  With the apparatus tanks will be made of stainless steel.
  •  The whole set-up is well designed and arranged in a good quality painted structure.
Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “cavitation apparatus” apparatus
  •  1 instruction manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Technical description:
  • The experimental set up consist of a circular transparent cylindrical tank in which four circumferential jets are placed along the circumference of the cylinder near its bottom which helps in the formation of free vortex. It is
  • Assumed that the torque exerted by these jets is negligible. A pointer can be transversed horizontally & vertically across full diameter of the vessel so that water surface profile can be measure. Both axes contain graduations so
  • That exact position of the pointer is known. The experimental procedure involves measurement of the resulting free surface that represents the variation of the sum of the pressure head and datum head. An arrangement is provided to drain the vessel.
Learning objects/experimentation:
  •  To plot the surface profile of a free vortex by measurement of the surface profile coordinates and to show that total energy is constant throughout vortex.
Requirement for operation:
  •  Electricity supply: single phase 220 v ac, 50 hz, 5-15 amp socket with earth connection.
  •  Water supply (initial fill).
  •  Drain required.
  •  Floor area required: 1 m x 1 m.
Technical specification:
  •  Cylinder: material acrylic. Dia. 200 mm (approx).
  •  Height:200mm approx
  •  Water circulation: fhp pump, crompton make.
  •  Flow measurement: using rota meter.
  •  Sump tank: made of stainless steel, compatible capacity.
  •  Control panel comprises of:
  •  Standard make on/off switch, mains indicator, etc.
  •  An english instruction manual consisting of experimental procedures, block diagram etc. Will be provided along with the apparatus
  •  The whole set-up is well designed and arranged on a rigid structure painted with industrial pu paint.
Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “free vortex apparatus” apparatus
  •  1 instruction manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of bernoullis theorem apparatus.
Technical description:
  • The equipment is designed and fabricated to demonstrate the bernoulli's theorem. It consists of a test section made of acrylic. It has convergent and divergent sections. Pressure tapings are provided at different locations in convergent and divergent section. Present set-up is self-contained water re-circulating unit, provided with a sump tank, centrifugal pump etc. An arrangement is done to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.
Learning objects/experimentation:
  •  To verify bernoulli's theorem experimentally.
  •  To plot the total energy vs distance.
Requirement for operation:
  •  Water supply drain.
  •  Electricity 0.5 kw, 220 v ac, single phase.
  •  Floor area 1.5 x 0.75 m.
Technical specification:
  •  Test section: material acrylic (one piece).
  •  Piezometer tubes: material p.U. Tubes (7 nos.)
  •  Water circulation: fhp pump, crompton make.
  •  Flow measurement: using measuring tank with piezometer, capacity 25 ltrs.
  •  Sump tank: capacity 70 ltrs.
  •  Inlet tank: capacity 20 ltrs.
  •  Stop watch: electronic.
  •  Control panel comprises of:
  •  Standard make on/off switch, mains indicator, etc.
  •  Tanks will be made of stainless steel.
  •  Instruction manual : an english instruction manual will be provided along with the apparatus
  •  The whole set-up is well designed and arranged in a good quality painted structure
Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “bernoulli's theorem apparatus” apparatus
  •  1 instruction manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of fluid friction apparatus.

Technical description:
  • The present set-up is designed to study the friction head losses through pipes, fittings, and flow metering devices. Four different id sizes smooth pipes and one artificially roughened pipe is connected in parallel. A valve arrangement is provided to operate the one pipe at a time. Various types of fitting are also fitted with pressure taps to conduct the experiment. Flow meters (venturimeter and orificemeter) is also accompanies the set-up. For water circulation and flow rate determination sump tank & measuring tank are provided. The educational software and data –logging package has been developed for this unit. It is compatible to interfacing unit designed by kc engineers. It provides a comprehensive educational software environment within which the investigations can be performed. This software runs in windows xp. It is capable to tabulate the samples readings according to requirement of experiment under study and results obtained can be compared. Interfacing the set up with computer using software can do the real time data acquisition. Data can be transferred in excel files for further calculations, plotting graphs etc. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in excel etc.
Learning objects/experimentation:
  •  Confirming the relationship between head loss due to fluid friction and velocity for flow of water
  •  To determine the head loss associated with flow through pipe fittings.
  •  To study the differential head devices for measurement of flow rate.
Requirement for operation:
  •  Electric supply, single phase, 220 v ac, 50 hz, 5-15 amp combined socket with earth connection.
  •  Water supply (initial fill)
  •  Floor drain required.
  •  Floor area required : 3 m x 0.75 m
  •  Computer p iv, with dvd drive, windows xp and ms office xp version preloaded. One usb slot
  • Free for hardware.
  • Technical specification:
  •  Pipes (5 no fittings): 4 smooth bore and one roughened bore. Size range between id 4.5mm.
  •  Valves:90o bend (small),90bend (large),90 elbow, 90 mitre,45 elbow 45 y 90 t, sudden enlargement & contraction, gate valve, ball valve, globe valve
  •  Flow meters: venturimeter, oriffice
  •  Dpt: for measuring differential pressure, 0-10000 mm of wc output 4-20 ma.
  •  Pressure tapings: as per requirement
  •  Control panel consists of:
  •  Standard make on/off switch, mains indicator, etc.
  •  An english instruction manual consisting of experimental procedures, block diagram etc. Will be
  • Provided along with the apparatus
  •  The whole set-up is well designed and arranged on a rigid structure painted with industrial pu Paints.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of losses due to pipe friction in pipe lines .
Technical description:
  • The setup consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a differential manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.
Learning objects/experimentation:
  •  To determine the losses due to fiction in pipes.
  •  To determine the friction factor for darcy we is back equation.
Requirement for operation:
  •  Water supply.
  •  Drain.
  •  Electricity 0.5 kw, 220v ac, single phase.
  •  Floor area 1.5 x 0.75 m.
Technical specification:
  •  Pipe test section: (i) dia ½”, length : 1m, material g.I.
  • (ii) dia ¾”, length: 1.25m, material g.I.
  •  Water circulation: fhp pump, crompton/godrej/g.E makes.
  •  Flow measurement: using measuring tank with piezometer, capacity 25 ltrs.
  •  Sump tank: capacity 50 ltrs.
  •  Stop watch: electronic.
  •  Control panel comprises of :
  • Standard make on/off switch, mains indicator, etc.
  •  Instruction manual : an english instruction manual will be provided along
  • With the apparatus tanks will be made of stainless steel.
  •  The whole set-up is well designed and arranged in a good quality painted structure.
Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “ losses due to friction in pipe lines” apparatus
  • 1 instruction manual consisting of experimental procedures, block diagram etc

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of discharge over notches apparatus .
Technical description:
  • The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required notch is fitted at one end of this channel. A pointer gauge with vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three notches, i.E. Rectangular notch, 60 v notch & 45 v notch is provided along with the set-up. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.
Learning objects/experimentation:
  •  To determine co-efficient of discharge (cd) through:
  •  V notch 45°
  •  V notch 60°
  •  Rectangular notch.
Requirement for operation:
  •  Water supply.
  •  Drain.
  •  Electricity 0.5 kw, 220v ac, single phase.
  •  Floor area 1.5 x 0.75 ml
Technical specification:
  •  Channel test section: size 600 x 250 x 180 mm.
  •  Notches : material brass
  • Rectangular notch
  • 45° v notch
  • 60° v notch
  •  Pointer gauge : with vernier scale.
  •  Water circulation: fhp pump crompton makes.
  •  Flow measurement: using measuring tank with piezometer, capacity 25 ltrs.
  •  Sump tank: capacity 50 ltrs.
  •  Stop watch: electronic.
  •  Control panel comprises of :
  • Standard make on/off switch, mains indicator, etc.
  •  Instruction manual : an english instruction manual will be provided along with the apparatus tanks and channel will be made of stainless steel.
  •  The whole set-up is well designed and arranged in a good quality painted structure.
Control panel:
  •  Standard make on/off switch, mains indicator etc.
  • Scope of delivery:
  •  1 self-contained “discharge over notches apparatus” apparatus
  •  1 instruction manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of flow through orifice & mouthpiece apparatus.
Technical description:
  • It consists of a tank provided with inlet supply diffuser, overflow. Provision for fitting orifice or mouthpiece at the outlet of tank. An arrangement is done to vary head and keep it constant at desired level. A pointer gauge arrangement for measuring x-y co-ordinates of jet is also fitted. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow rate of water is measured with the help of measuring tank and stop watch.
Learning objects/experimentation:
  •  To determine the co-efficient of discharge of different orifice and mouthpieces.
  •  To determine the co-efficient of velocity
Requirement for operation:
  •  Water supply.
  •  Drain.
  •  Electricity 0.5 kw, 220 v ac, single phase.
  •  Floor area 1.5 x 0.75 m.
  • Technical specification:
  •  Set of orifices: material acrylic (2 nos.)
  • Dia. 10mm and 15 mm
  •  Set of mouthpieces: material acrylic (3 nos.)
  • Dia 10 mm (l/d = 1)
  • Dia 10 mm (l/d = 2.5)
  • Dia 10 mm (l/d = 4)
  •  Constant head tank: 35 ltrs.
  •  Pointer gauge: to measure x-y co-ordinates of jet.
  •  Water circulation: fhp pump, crompton make.
  •  Flow measurement: using measuring tank with piezometer, capacity 25 ltrs.
  •  Sump tank: capacity 70 ltrs.
  •  Stop watch: electronic.
  •  Control panel comprises of :
  • Standard make on/off switch, mains indicator, etc.
  •  Instruction manual : an english instruction manual will be provided along
  • With the apparatus tanks will be made of stainless steel.
  •  The whole set-up is well designed and arranged in a good quality painted structure
Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “flow through orifice and mouthpiece apparatus” apparatus
  •  1 instruction manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of pitot static tube apparatus.

Technical description:
  • A pitot tube is used to measure the local velocity at a given point in the flow stress. A pitot tube of standard design made of copper/ss is supplied and is fixed below vernies scale. The vernies scale is capable to measure the position of pitot tube in transparent section. The pipe has a flow control valve to regulate the flow. An u-tube manometer is provided to determine the velocity head. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.
Learning objects/experimentation:
  •  To find the point velocity at the center of a tube for different flow rates of water and calibrate the pitot tube.
  •  To plot velocity profile across the cross section of pipe.
Requirment for operation:
  •  Electricity supply: single phase, 220v ac, 50hz, 5-15 amp combined socket with earth connection.
  •  Water supply (initial fill).
  •  Floor drain required.
  •  Floor area required: 1.5 x 0.75 m.
  •  Chemical required: ccl4 - 50 ml and iodine pallets for ccl4
Technical specification:
  •  Pitot tube: material copper/ss of compatible size fitted with vernies scale.
  •  Test section: material clear acrylic, compatible to 1” dia. Pipe.
  •  Water circulation: fhp pump, crompton make.
  •  Flow measurement: using measuring tank with piezometer (capacity 25 ltrs.)
  • And electronic stop watch
  •  Sump tank: capacity 50 ltrs.
  •  Control panel comprises of :
  • Standard make on/off switch, mains indicator, etc.
  •  Instruction manual : an english instruction manual will be provided along
  • With the apparatus tanks will be made of stainless steel.
  •  The whole set-up is well designed and arranged in a good quality painted structure.
  • Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “pitot tube setup” apparatus
  •  1 instruction manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Nozzle Meter Test Rig.

Technical Description:

The apparatus consists of a Nozzle meter made of stainless steel houses in Acrylic Test Section. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

 

LEARNING OBJECTS/EXPERIMENTATION:

  • To measure discharge through Nozzle meter.
  • To calculate co-efficient of discharge for nozzle meter.

 

REQUIREMENT FOR OPERATION:

  • Electricity Supply: Single Phase 220 V AC, 50Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill).
  • Floor Drain required.
  • Mercury (Hg) for manometer(250 gm)
  • Floor Area Required:    1.5 m x 0.75 m

 

TECHNICAL SPECIFICATION:

  • Nozzle meter : Nozzle of Stainless Steel, Housing of Clear Acrylic.
  • Compatible to 1” dia pipe.
  • Water Circulation : FHP Pump, Crompton make
  • Flow Measurement : Using Measuring Tank, (Capacity 25 Ltrs. (approx.) and Electronic Stop Watch
  • Sump Tank : Capacity 55 Ltrs. (approx.)
  • Control Panel Comprises of :
  • Standard make On/Off Switches, Mains Indicator, etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure

 

Control Panel: 

  • Standard make on/off switch, Mains Indicator etc.

Scope of Delivery: 

  • 1 Self-contained “NOZZLE METER TEST RIG” Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

 

 


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Met Centric Height Apparatus.

Technical Description:

A pontoon is allowed to float in a small tank having a transparent side.  Removable steel strips placed in the model for the purpose of changing the weight of the model.  Displacement of weight is measured with the help of a scale. By means of a pendulum (consisting of a weight suspended to a long pointer) the angle of tilt can be measured on a graduated arc.For tilting the ship model, a cross bar with movable hanger is fixed on the model.  Pendulum and graduated arc are suitably fixed at the center of the cross bar.  A set of weights is supplied with the apparatus.

 

LEARNING OBJECTS/EXPERIMENTATION:

Ø  Determination of the met centric height and position of the met centric height with angle of heel of ship model.

 

REQUIRMENT FOR OPERATION:

Ø  Water Supply : Initial Fill

Ø  Floor Area 1 m x 0.6 m.

Ø  Drain required.

 

TECHNICAL SPECIFICATION:

Ø  Pontoon: Size 300 x 300 mm (approx.) with a Horizontal Guide Bar for

Ø  aliding weight and Removable Strips, Graduated Arc with Pointer with moveable hanger and set of weights.

Ø  Water Tank : Size 550 x 500x 400 mm (approx.)

Ø  Front Window of Tank : Made of Glass/Perspex.

Ø  A set of weights is supplied with the apparatus.

Ø  Instruction Manual : An ENGLISH instruction manual will be provided along

Ø  with the Apparatus Tanks will be made of Stainless Steel.

Ø  The whole set-up is well designed and arranged in a good quality painted structure.

 

Control Panel: 

Ø  Standard make on/off switch, Mains Indicator etc. 

 

Scope of Delivery: 

Ø  1 Self-contained “MET CENTRIC HEIGHT APPARATUS” Apparatus 

 

Ø  1 Instruction Manual consisting of experimental procedures, block diagram etc.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Venturimeter and Orifice Meter Test Rig.

Technical Description:

The apparatus consists of three pipelines emerging out from a common manifold.  One pipe line contain a Venturimeter, second contains an Orifice and third pipe line contains a Rota meter. The pressure tapings from the Venturimeter and Orifice meter are taken to differential manometer to measure pressure difference. The Venturimeter, Orifice meter and Rota meter are connected in parallel and any one of them can be put in operation by operating valves provided at the downstream. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank & stop watch.

 

LEARNING OBJECTS/EXPERIMENTATION:

Ø  To determine the co-efficient of discharged through Venturimeter and orifice meter. 

Ø  To measure discharge through Venturimeter, Orifice meter and Rotameter

Ø  To calibrate the Rotameter.

 

REQUIRMENT FOR OPERATION:

Ø  Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection.

Ø  Water Supply (Initial Fill).

Ø  Floor Drain required.

Ø  Floor Area Required:  1.5 m x 0.75 m.

 

TECHNICAL SPECIFICATION:

Ø  Venturimeter: Material Clear Acrylic compatible to 1”Dia. Pipe.

Ø  Orificemeter: Orifice plate made of Stainless Steel and housing made of Clear Acrylic compatible to 1” Dia. Pipe.

Ø  Rota meter: Compatible Range. Eureka makes.

Ø  Water Circulation: FHP Pump, Crompton makes.

Ø  Flow Measurement: Using Measuring Tank (Capacity 25 ltrs.) and Electronic Stop Watch.

Ø  Sump Tank: Capacity 50 Ltrs.

Ø  Control Panel Comprises of: Standard makes On/Off Switch, Mains Indicator, etc.

Ø  Instruction Manual: An ENGLISH instruction manual will be provided along With the Apparatus.

Ø  Tanks will be made of Stainless Steel.

Ø  The whole set-up is well designed and arranged in a good quality painted structure.

 

Control Panel: 

Ø  Standard make on/off switch, Mains Indicator etc. 

 

Scope of Delivery: 

Ø  1 Self-contained “VENTURIMETER, ORIFICEMETER & ROTAMETER TEST RIG” Apparatus

 

Ø  1 Instruction Manual consisting of experimental procedures, block diagram etc.


Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Hydraulic Bench.

Description

We can use Hydraulics Bench for pumping and volumetric measurement of the water supply with which all the additional accessories and experiments are used. The working surface is moulded in fiberglass and provided with a recessed area on which to mount experiments.

An integral weir tank is provided along with a volumetric measuring tank which is stepped to afford accurate measurement of both high and low flow rates. The measuring tank discharges into a fiberglass sump tank by means of a quick acting PVC ball valve. Electric motors drive fixed centrifugal pumps which deliver water to the outlet at the working surface for connection to the individual experiments. The flow is regulated by a brass valve.

Specification

  • Sump tank capacity – 120 litres
  • High flow volumetric tank – 40 litres
  • Low flow volumetric tank – 10 litres
  • Electrical requirements – 240 volt Single phase 50/60 Hz supply
Dimensions
  • Length 1400mm.
  • Width 740mm.
  • Height 1100mm.
  • Weight 70 kg.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Losses Due To Pipe Fittings Sudden Enlargement & Contractio.

Technical Description:

The set up consists of a ½” bend and elbow, a sudden expansion & sudden contraction fitting from 15mm to 25mm, ball valve and gate valve.  Pressure tapings are provided at inlet and outlet of these fittings under test. A differential manometer fitted in the line gives pressure loss of individual fittings. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

 

LEARNING OBJECTS/EXPERIMENTATION:

  • To determine loss of head in the fittings at various water flow rates.
  • To measure the loss coefficient for the pipe fittings.

 

REQUIREMENT FOR OPERATION:

  • Water Supply (Initial Fill)
  • Drain.
  • Electricity 0.5 kW, 220V AC, Single Phase.
  • Floor Area 1.5 x 0.75 m.

 

TECHNICAL SPECIFICATION:

  • Manometer Fluid : Mercury (Hg) - 250 gm
  • Sudden Enlargement  : From 15mm to 25mm
  • Sudden Contraction: From 25mm to 15mm.
  • Bend: ½”
  • Elbow: ½”
  • Ball valve: ½”
  • Gate valve: ½”
  • Water Circulation: FHP Pump, Crompton makes.
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 25 Ltrs.
  • Pressure Drop Measurement: Differential Manometer
  • Sump Tank: Capacity 50 Ltrs.
  • Stop Watch: Electronic.
  • Control Panel Comprises of :
  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.

 

Control Panel: 

  • Standard make on/off switch, Mains Indicator etc.

 

Scope of Delivery: 

  • 1 Self-contained “LOSSES DUE TO PIPE FITTINGS, SUDDEN ENLARGEMENT & CONTRACTION” Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Various  Flow Channel

  • Flow Channels
  • Clear acrylic working section fed from stilling tank
  • Six different models for investigation
  • Dye injection system
  • Quick release fitting for easy connection to hydraulics bench
  • Educational Software available as an option.
Technical Details:
Item Value
  • Dye injection needles      :        5
  • Dye reservoir capacity     :        0.45 litres
  • Width of channel            :        15mm
  • Length of channel           :        615mm
  • Depth of channel            :        150mm
  • Models                            :        -broad crested weir
  • Narrow crested weir
  • Symmetrical aerofoil
  • Asymmetrical aerofoil
  • Small cylinder
  • Large cylinder

Send Bulk Enquiry
 
X

Download Brochure
Advanced Technocracy Inc.

Kunal Chopra (CEO)
ATICO House, 5309 Grain Market, Near B. D. Senior Secondary School Aticoindia@gmail.com
Ambala - 133001
Haryana, India
Send Email
© Advanced Technocracy Inc.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited