General Laboratory Equipment

Moisture Analyzer (Digital) sturdy & versatile equipment suitable for wide range or grains, oil seeds, pulses etc. It has inbuilt battery indicator and is high speed and accurate.

Technical Data:

 

Infrared Moisture Balance has aluminum body duly finished with hammertoe paint, heat control with electronic regulator. Easy to operate. With accuracy of 0.2% by direct reading 0.1%. Complete with L-shaped thermometer, 10-Disposal Pan, One tweezer and instructional manual.

Range

• 5gms
• 10 gms
• 25 gms

The motor of Laboratory Stirrer having maximum speed up to 4000 r.p.m. Unit is clamped to C.P. provided rod fitted on a heavy cast iron base. The height and of the stirrer can be adjusted according to the requirement. Variable speed motor with 1/20 H.P. Regulator is fitted with S.S. Stirrer rod to give smooth and noiseless operation.

Optional:

Automatic 0-60 minutes Timer.

Lab Willey Grinder (Arthur H. Thomas Type) is recommended  for  grinding  dry  plant  samples.  Also  for  a  great  variety  of  commercial dry materials. The unit has two stationary steel edges provided in the cast iron chamber. A removable safety Glass sheet plate from the face of chamber of permit  observation during operation. Willey Mill is fitted on substantial cast iron base. Complete unit supplied with aluminium/ Cast Chamber. Polished hoper with cover, wooden plunger, three delivery tubes mounted with sieves cloth mesh no:20, 40 and 60 mesh. One Allen Key for adjusting blades and 3 Glass Jars, brush etc. Electrically operated to work on 220 Volts AC.

Ball Mill Laboratory Type is electrically operated heaving capacity from a few grams, to 1 kg. or 2 kg or 5 kg. Fitted with a F.H.P. motor cap. up to 2 kg. jar and with ¼ H.P. Heavy-duty motor for 5 kg. jar. Maximum speed 80 R.P.M. supplied with steel balls for mixing and grinding particularly soft powder. Operates on 220V AC mains.

Capacity

• 1 kg jar
• 2 kg jar
• 5 kg jar

Optional:

• Automatic 0-60 minutes timer

Vacuum Pumps are V Belt driven at 400 rpm and fitted with electric motor mounted on a cast iron base plate. Material of construction is specially chosen (graded cast iron) and all the parts are precisely machined. Micron finished and assembled to close tolerance for high efficiency. Pumps are supplied either single stage or double stage. Single stage pump creates maximum vacuum of 0.01 Hg. Column and double stage creates 0.01 Hg. Suitable to work 220V single phase, 50 Hz power supply.

Following the range of vacuum pumps (Single/Double stage)

Optional:

• High Vacuum oil per liter.
• Moisture Trap, with non return valve and vacuum gauge with regulator Combined.

Clinical Centrifuge is electrical operated dome type sturdy stable heavy body with resiliently mounted motor working on 220V AC 50Hz single phase for vibration free performance with built in 5- speed regulator and non-removable swing out rotor. Complete with tube carriers. Maximum speed 3500 RPM. Neatly finished in stoving enamel.

• 4x15ml tubes.
• 6x15ml tubes.
• 8x15ml tubes.

Optional:

• 0-60 minutes timer

Centrifuge Angle Rotor Head has 3500 to 4500  R.p.m. With speed regulator and plug & cord.

Capacity

• 4x15ml tubes
• 6x15ml tubes
• 8x15ml tubes

4000 to 5000 r.p.m fitted with electronic solid state speed regulator top cover made of transparent acrylic sheet cord & plug

Capacity:

1. 4x15 ml tubes.
2. 6x15 ml tubes.
3. 8x15 ml tubes.
4. 12x15 ml tubes.

Optional:

1. Automatic Timer (Manual)
2. Automatic Timer (Digital)
3. Speed Meter (Manual)
4. Speed Meter (Digital)

Latest model designed for quick and convenient measurement of refractive index and also dispersion of liquids and solids. In additional a sugar scale in provided facilitating measurement of percentage of sugar in solution. Useful for measuring refractive index in the range of 1.3 to 1.7 with an accuracy of 0.01 direct on scale and 0.0001 by estimation. Sugar percentage of 0-95 % with an accuracy of1%  on scale and 0.01 by estimation can be measured. Packed in a wooden cabinet.

Designed on laurent’s half shade principle for accurate results. Equipped with polarizing unit analyzer precisely graduated scale capable of rotation and divided in single degrees venier reading to 1/10 supplied complete with 200 mm polar meter tube, hand magnifier for easy reading of vernier packed in cabinet.

Latest polarimeter equipped with imported optical components and to accept observation tube up to 220mm length Sensitive and accurate glass scale is divided to read angular degrees and also carrier sugar scale in ISS units. The angular scale from 0-360 degrees is sub-divided 0.2º The sugar scale from 30º to 120º ISS units enable direct reading to .1 and by estimation, 05 sugar degrees. Complete with polarimeter tube 200mm in a wooden cabinet.

Scientific research has discovered that used syringes and needles are very dangerous to human which can cause incurable disease like AIDS. Hepatitis and many more. Needle and syringe in a sage, Eco friendly, Cost effective manner. Needle & Syringe in a safe, Eco friendly, cost effective manner, after switching ON, insert the used needle to small hole provided and within second the needle will be destroyed. Insert the syringe on the top of the machine in the big hole provided with a cutting blade, just pull the lever and syringe will be cut into two.

For viewing and detecting prepared substances on T.L.C. layers fitted with long  U.V. Tubes of different wave lengths, without filter, for use on 200V AC. Separate lamp for  visible light.

For viewing and detecting prepared substances on T.L.C. layers fitted with long wave (365 nm) U.V. tube for use on 220V AC.

For determination of melting points up 350º C. The mounted block is illuminated from below by a lamp fixed in its housing. The aluminum block accepts three capillary tubes and mercury thermometer. The temperature is regulated by energy regulator fitted to the unit. The lamp provides uniform and shadow less light, regulator fitted to the unit. Supplied without capillary tubes and thermometer.

Body is fabricated out of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. The hot plate made of cast iron or top is made of highly polished stainless steel sheet precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the late to operate on 220V 50 Hz single phase. Temp. Is controlled by a three-heat rotary switch/energy regulator as per demand.


Hot Plate: (Round) Single

• Specification As Above With 20 Cm (8”) Dia. Mounted Top/Ss Sheet Top.

Hot Plate: (Round) Double

• As Per Adi-75 But Two Plates Of 20 Cm (8”) Dia. Having Independent Pilot Lamps & Switches.

Hot Plate (Rectangular)

• As Per Adi-75 But Plate Is Rectangular Shape.

Optionals:

• Sunvic energy regulator can be provided against routine energy regulator.
• Digital temp. Indicator-cum-controller.

It with stands high temperature up to 350º C. The body of the mantle is spun in one piece from non-rusing Aluminium (up to 5.0 liters capacity) duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. All heating mantels are lagged with special grade mineral wool. Works on 220/230 Volts A.C.

Optionals:

• Microprocessor PID digital temp. indicator-cum-controller.

Moisture Analyzer (Digital) Direct Reading is sturdy & versatile equipment suitable for wide range or grains, oil seeds, pulses etc. It has inbuilt battery indicator and is high speed and accurate.


Technical Data:

• Direct Reading Display for all commodities

• RS-232 Port available for interfacing Printer or Personal Computer Separate code for each commodity

• No Arithmetic Required

• Room Temperature Display

A pocket refract meter designed on the principle of total reflection for measuring the refractive index. Built in ocular scale, on inspection, gives direct reading for percentage of sugar density

• Range 0-32% in division of 0.2%
• Range 28-62% in division of 0.2%
• Range 58-92% in division of 0.2%

Made out of borosilicate glass with screw cap and bubble trap

• Length 100mm
• Length 200/220mm
• Length 400mm

Made out of borosilicate glass.

• Length 100mm
• Length 200mm
• Length 400mm

Cadaverous Injector used for injection formaldehyde solution in cadaverous at much higher speed than normal gravity process. Unit is fully covered mounted on a portable trolley having four castor wheels for easy movement.

Unit consists of one air compressor fitted with ½ hp motor which is connected a with stainless steel tank of 10 liters capacity meant for storing and injecting the solution. Tank is fitted with a safety valve, pressure gauge and rubber tubing having provision for injection. Supplied complete with electric cord, plug and works on 220V, single phase 50Hz power supply.