Advanced Technocracy Inc.
Grain Market, Ambala, Haryana
Send E-mail
Send SMS
Home»Our Products»

Polarimeter

Pioneers in the industry, we offer centrifugal blower test rig, centrifugal pump test rig, double stage air compressor test rig, gear pump test rig, hydraulic ram test rig and single effect evaporator from India.

REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Centrifugal Blower Test Rig.

Technical Description:

This equipment comprises of a FD Centrifugal Blower coupled to a Motor. Three interchangeable impellers with forward, backward and radial vanes are provided with the test rig. A Pitot Tube is provided in the delivery line of blower for static Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Blower.

LEARNING OBJECTS/EXPERIMENTATION:

To study the effect of forward curved, back curved and radial curved impeller
To find out the discharge, head and efficiency of the Centrifugal Blower.
To plot the graph Efficiency Vs Discharge
To plot the graph Discharge Vs Head
EQUIRMENT FOR OPERATION:
Electricity 1 KW, 220V AC, Single Phase.
Floor Area 2.5 x 0.75 m.

TECHNICAL SPECIFICATION:

Fixed Speed : AC motor, 1HP Crompton make.
Blower : Centrifugal, Forced Draft Type
Impeller (3 Nos.):Forward Curved, Backward Curved & Radial Curved
Pitot Tube (with manometer) : For Static, Dynamic & Differential Pressure measurement.
Stop watch: Electronic
Control Panel Comprises of:
Energy measurement: Electronic Energy meter, L&T make.
MCB: For Over load Protection.
Standard make On/Off Switch, Mains Indicator, etc.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be
provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU
Paint.

Control Panel:
Standard make on/off switch, Mains Indicator etc.
Scope of Delivery:
1 Self-contained “CENTRIFUGAL BLOWER TEST RIG” Apparatus
1 Instruction Manual consisting of experimental procedures, block diagram etc.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Centrifugal Pump Test Rig.

Centrifugal Pump Test Rig

The setup is designed to study the performance of centrifugal pump. Set up consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided

Experiment :
  • To determine overall efficiency and pump efficiency of the centrifugal pump.
  • To plot Head vs. Discharge, Pump efficiency vs. Discharge
Utilities Required :
  • Electric supply
    • Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC.),
    • 5A, three pin socket with switch for pump.
  • Water supply
    • Tap water connection BSP
    • Distilled water @ 180 liters (optional)
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer, & of double stage air compressor test rig.

Technical description:
  • Two stage air compressor test rig consists of a double stage reciprocating type air compressor driven by 2 hp
  • Motor through a belt. The outlet of the air compressor is connected to reservoir (tank) and suction is connected to
  • Another air tank with a calibrated orifice plate and a water manometer. Bellow is fitted on one side of the air tank to
  • Regulate the flow. Temperature of inlet air, after single compression, inlet and outlet of second compression and
  • Pressure in reservoir and at intermediate stage can be measured by temp. Sensors and gauges.
Learning objects/experimentation:
  • To calculate the volumetric efficiency.
  • To calculate isothermal horse power.
  • To calculate compression ratio.
  • Requirment for operation:
  • Electricity 2 kw, 220v ac, single phase.
  • Floor area 2.5 x 1.25 m.
Technical specification:
  • Compressor : double stage
  • Double cylinder, make: kirloskar capacity 6.9 cfm max.
  • Working pressure: max. 7 kg/cm
  • Motor : 2 hp crompton/standard make, swinging field type
  • Spring balance : 10 kg, dial type
  • Flow measurement : orifice meter with manometer
  • Temperature measurement: rtd pt-100 type sensor (4 nos.)
  • Air tank :capacity 150 ltrs. With safety valve, shut off valve,
  • Pressure gauge: bourdon type.
  • Control panel comprises of:
  • Rpm measurement: rpm indicator with proximity sensor.
  • Mcb : for overload protection
  • An english instruction manual consisting of experimental procedures, block diagram etc. Will be
  • Provided along with the apparatus.
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial pu paint.
Control panel:
  • Standard make on/off switch, mains indicator etc.
Scope of delivery:
  • 1 self-contained “double stage air compressor test rig” apparatus
  • 1 instruction manual consisting of experimental procedures, block diagram etc.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Gear Pump Test Rig.

Gear Pump Test Rig

The setup is designed to study the performance of gear pump.

Set up consists of a gear pump having a pair of meshed gears coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop oil circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement.

The flow rate of water is measured using measuring tank and stop watch provided

Experiment:
  • To determine overall efficiency and pump efficiency of the gear pump.
  • To plot Head vs. Discharge, Pump efficiency vs. Discharge
Utilities Required:
  • Electric supply
    • Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC.),
    • 5A, three pin socket with switch for pump.
  • Oil supply
    • Oil @ 30 liters
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Hydraulic Ram Test Rig.

Description:

Hydraulic Ram is used for pumping small quantity of water at high head, when large quantity of water at small head is available. It operates on the principle that if flowing water is suddenly brought to rest in a long pipe, a phenomena known as water hammer occurs, wherein a pressure wave travels along the pipe. This principle is used in the Hydraulic Ram to pump water The set-up consists of a box incorporating pulse and non-return valves and a supply reservoir on a stand which is fed by the overhead tank. An air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery.

Technical Details :
Ram : Supply Head 1.0 m, Delivery Head 4 m (Max.)
Water Circulation : FHP Pump, Crompton make.
Sump Tank : Capacity 140 Liters. (approx.)
Overhead Tank : Capacity 50 liters. (approx.)
Air Vessel : Suitable Capacity.
Flow Measurement : Using Measuring Tank & Electronic Stop Watch for waste water and for useful water
Pressure Gauge : Bourdon type.

Experimentation:

  • To find out discharge of useful water and waste water.
  • To find out the efficiency of the Hydraulic ram.
  • Utilities Required :
  • Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection.
  • Water Supply (Initial Fill)
  • Floor Drain required.
  • Floor Area Required: 1.5 m x 0.75 m
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Single Effect Evaporator

Technical Description:

Evaporation deals with the concentration of a non-volatile solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing a part of the solvent, useful product i.e. the concentrated solution or thick liquor is produced and the vapour is discarded. Long tube evaporators are usually used for the concentration of foamy liquids.The set-up consists of stainless steel tubes surrounded by a stainless steel jacket and fitted with accumulator. Dilute solution is feed to tubes. Steam from a steam generator is supplied to shell to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator is recycled through the evaporator.

Learning Objects/Experimentation:

  • To concentrate a solution and to evaluate the following at steady state:
  • Material and Heat Balance.
  • Economy and the capacity of the evaporator.
  • Overall heat transfer co-efficient.

Requirement For Operation:

  • Water supply 5 lit/min (approx.) and Drain.
  • Electricity Supply: 1 Phase, 220 V AC, 4 kW.
  • Required Chemicals.

Technical Specification:

  • Evaporator : Material stainless steel
  • Shell Dia - 75mm, Length - 750mm,
  • Tubes Dia - 12mm, Length - 750mm
  • Feed Circulation : By Gravity feed
  • Feed Tank: Material stainless steel, Capacity 25 Ltrs.
  • Flow Measurement: Rota meters (One each for feed & cold water).
  • Steam Generator: Made of stainless steel provided with Pressure Gauge & Level Indicator, Safety valve and drain etc. & insulated with ceramic wool and cladding with Aluminium foil.
  • Piping: Stainless Steel and PVC, size ¼”.
  • Condenser: Shell & Tube type made of Stainless Steel.
  • Bottom Product Tank: Made of Stainless Steel, capacity 10 Ltrs.
  • Water Supply Tank: Made of Stainless Steel, capacity 50 Ltrs. For condenser
  • Pump : FHP capacity
  • Heaters: Nichrome wire heater.
  • Control panel comprises of
  • Digital Temp. Controller: 0-199.90C, (For Steam Generator)
  • Digital Temp. Indicator: 0-199.90C, with multi-channel switch.
  • Temp. Sensors: RTD PT-100, Standard make On/Off switch, Mains Indicator etc.
  • The whole set-up is well designed and arranged on a good quality painted structure

Control Panel:

 

  • Standard make on/off switch, Mains Indicator etc.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Kaplan Turbine Test Rig.

Leveraging on our immense understanding and skills in this domain, we are reckoned as a valuable manufacturer and exporter of Kaplan Turbine Test Rig. We manufacture these rigs in compliance with the set industrial norms and standards using only high grade materials sourced from the authentic vendors. Our Kaplan Turbine Test Rig is available in customized specifications as per the requirements of the clients. We also offer these rigs at the market leading price to the clients.

Features:

  • Excellent functionality
  • Unmatched performance
  • Robust construction
Specifications:
  • Speed 1500 RPM (Approx.)
  • Runner with adjustable curved vanes
  • Discharge Measurement Pitot Tube with Manometer.
  • Control Panel Starter, Mains Indicator
  • With Digital Techometer
  • Tanks will be made of Stainless Steel
  • The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Multi Stage Air Compressor Test Rig.

From our extensive range of products, we manufacture and supply supreme quality Multistage Air Compressor Test Rig that is used in chemistry laboratories. It is widely used for calculating the volumetric efficiency, isothermal HP and compression ratio. For the fabrication of this test rig, our team of diligent professionals use premium grade components with the help of ultra-modern technology in sync with the defined industry standards. This Multistage Air Compressor Test Rig is available in varied technical specifications for fulfilling the demands of our reputed clients at nominal rates.

Features:

  • Optimum strength

  • High operational fluency

  • User friendly design

  • Accurate results

Specifications:

  • Motor : 5 H.P., with torque measurement
  • Compressor : 2 cylinder
  • Pressure : 10 Kg/cm2
  • Flow measurement : Orifice meter
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Reciprocating Pump Test Rig .

DESCRIPTION :-

The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with a DC Motor Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of water is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

EXPERIMENTATION :-

  • To determine total head, overall efficiency, pump efficiency and volumetric efficiency of the reciprocating pump.
  • To plot Graph:
  • Head vs Discharge
  • Pump efficiency vs Discharge.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer, & of single stage air compressor test rig.

Technical description:
  • Single stage air compressor test rig consists of a single stage reciprocating type air compressor driven by 1 hp motor through a belt. The outlet of the air compressor is connected to reservoir (tank) and suction is connected to another air tank with an orifice plate and a water manometer. Bellow is fitted on one side of this air tank to regulate the flow. Temperature of inlet and outlet of air and pressure at outlet can be measured by temperature sensor and pressure gauge.
Learning objects/experimentation:
  • To calculate the volumetric efficiency.
  • To calculate isothermal hp.
  • To calculate compression ratio.
Requirement for operation:
  • Electricity 2 kw, 220v ac, single phase.
  • Floor area 1.5 x 0.75 m.
Technical specification:
  • Compressor : single stage, capacity 4 cfm (max.) working pressure 5kg/cm2 max.
  • Drive :1 hp crompton make motor
  • Manifold tank : suitable capacity
  • Flow measurement :orifice meter with manometer
  • Temp. Measurement : rtd pt-100 type sensor (2nos.)
  • Rpm measurement: rpm indicator with proximity sensor.
  • Air tank: capacity 90 ltrs .With safety valve shut off valve.
  • Pressure gauge : bourdon type
  • Control panel comprises of:
  • Energy measurement: electronic energy meter, l&t make.
  • Mcb: for overload protection.
  • Standard make on/off switch, mains indicator, etc.
  • An english instruction manual consisting of experimental procedures, block diagram etc. Will be
  • Provided along with the apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial pu
  • Paint.
Control panel:
  • Standard make on/off switch, mains indicator etc.
Scope of delivery:
  • 1 self-contained “single stage air compressor test rig” apparatus
  • 1 instruction manual consisting of experimental procedures, block diagram etc
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of

Centrifugal Pump with Interchangeable Impellers

 

Set up consists of a centrifugal pump coupled with electrical motor, supply tank,measuring tank & pipe fittings for closed loop water circulation. Pressure and vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided.

 

Experiments:

  • To determine overall efficiency and pump efficiency of
  • To plot head vs. Discharge, pump efficiency vs.

 

Features:

  • Closed Loop Water Circulation
  • Compact & Stand-alone Set Up
  • Stainless Steel Tanks And Wetted Parts
  • Superb Painted Structure
  • Simple To Operate & Maintain

 

Utilities Required: Electric supply:

  • Provide 230 +/- 10 vac, 50 hz, single
  • Earth voltage less than 5 vac. ) 5a, three pin socket with switch for pump.
  • Water supply:
  • Tap water connection ½” bsp

 

Technical details:

  • Product centrifugal pump test rig
  • Pump
  • Drive
  • Supply tank
  • Measuring tank
  • Piping
  • Stop watch
  • Control panel
  • With required electrical instrumentation
  • Electronic
  • GI/ PVC
  • Capacity 75 ltrs. Moc ss fitted with piezometer tube & scale
  • Capacity 120 ltrs. Moc ss
  • DC motor with dc drive along with non-contact type digital rpm indicator capacity 1 hp speed 2800 rpm (max. ), head 12m(max. )
Send Bulk Enquiry
X
 

Download Brochure
Explore more products
Advanced Technocracy Inc.

Kunal Chopra (CEO)
ATICO House 5309, Grain Market, Near B.D. Senior Secondary School
Ambala - 133001
Haryana, India
Send Email
© Advanced Technocracy Inc.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited