Advanced Technocracy Inc.
Grain Market, Ambala, Haryana
Send E-mail
Send SMS
Home»Our Products»

Scientific And Laboratory Instruments

Our product range includes a wide range of digital flame photometers, drop wise & film wise condensation apparatus, advance uv visible spectrophotometer, auto photo colorimeters, emissivity measurement apparatus and atomic absporption spectrophotometer.

REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandAtico
ApplicationLaboratory Use

Description:
Digital Clinical Flame Photometer Dual Channel with Na K filters . Results in meq/l for medical use. Auto Ignition 3 Digit LED display single aspiration . It is supplied with compressor other accessories.

Specification:

  • Weight 6.5 kg (Approx.)
  • Size (LxBxH) 355 x 250 x 210 mm
  • Power 230V + 10% AC 50 Hz
  • Warmup time 10 minutes
  • Flame System LPG and dry oil free air
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Drop Wise & Film Wise Condensation Apparatus.

Technical Description:

Condensation is a phase change heat transfer process occurring in many industrial applications, such as in steam power plants, refrigeration plants etc. Thus this is one of the important heat transfer process as present in mechanical and chemical engineering applications.

 

The condensation of vapour on a surface is of two types:

1. Drop wise Condensation,

2. Film wise Condensation.

 

This setup is designed for determining heat transfer co-efficient of two types of condensation and for visualization of these processes.  It consists of a vertical frame.  Condensation tubes are fitted inside compact glass cylinder. Steam generator is fitted at the backside of the cylinder.  Steam comes directly from generator to the cylinder.  Two valves are fitted to control flow rate of water in individual tubes. Digital Temperature Indicator monitors the temperatures.  Pressure gauge and Rotameter can observe steam pressure and cold water flow rates respectively.  A Digital temperature Controller is provided for controlling the temperature of Steam. Water level indicator is provided in steam generator.  Condensate is measured by a measuring cylinder.

 

LEARNING OBJECTS/EXPERIMENTATION: 

  • To study the Film wise & Drop wise condensation of steam on a vertical surface.
  • Visualization of condensation process in drop wise as well as film wise condition.

 

REQUIREMENT FOR OPERATION:
  • Water supply 5 lit/min (approx.)
  • Electricity Supply: 1 Phase, 220 V AC, 1.5 kW.
  • Table for set-up support.

 

TECHNICAL SPECIFICATION:

  • Steam Generator  : 8 Ltrs. (Approx.) made of Stainless steel  with 1.5 kW heater. Insulated with ceramic wool and cladded by aluminum foil.
  • Pressure Gauge : Bourdon type.
  • Copper tubes (2 Nos.): one with natural finish and other nickel polished.
    Diameter: 19 mm (Approx.)
    Length: 170 mm (Approx.)
  • Water Flow measurement: Rotameter.
  • Condensate Measurement : Measuring Cylinder & Stopwatch
  • Control valves: one each for Steam, Cooling water & Drain.
  • Control panel comprising of : Digital Temp. Controller: 0- 199.90C (For Steam Generator)
    Digital Temp. Indicator: 0-199.90C, with multi-channel switch.
    Temperature Sensors : RTD PT-100 type.
    With Standard make On/Off switch, Mains Indicator etc.
  • Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus
  • The whole set-up is well designed and arranged on a Powder Coated structure.

 Control Panel:

  • Standard make on/off switch, Mains Indicator etc.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandAtico
ApplicationLaboratory Use
Wavelength Range (nm)190-1100 nm
Description:
Range 190 to 1100 nm with facility for automatic concentration, % Transmission, Absorbance & K Factor measurement. Automatic wavelength calibration and selection. It has sample holder with 4 position selector control for 10 mm path length cuvettes. Automatic wavelength calibration & wavelength scan. Automatic peak picking & spectrum display. Spectrum and data can be printed out by printer and sent to computer via USB port. 

Specification:
  • Wavelength Range 190-1100nm
  • Band Width 1 nm
  • Wavelength Accuracy +/-0.5 nm
  • Wavelength Repeatability +0.1nmWavelength Setting Automatic
  • Photometric Accuracy +/-0.1 %T
  • Photometric Repeatability +0.3 %T
  • Photometric Display Range -0.3-3.0A,0-200%T, 0-9999CStability +0.002A/h @ 500nm
Send Bulk Enquiry
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandAtico
Display Type3 Digit, Bright Red 7 Segment LED
Light Source6.8v, 300mA
Power (Hz)230V + 10%, 50 Hz. AC
Range (mm)400-700 nm
Resolution (%)OD : 0.01, %T : 1%
Display3 Digit, Bright Red 7 Segment LED
Range400-700 nm
ResolutionOD : 0.01, %T : 1%
Accuracy0.5% FSI
Automation GradeAutomatic
ConditionNew
PortableYes

Description:
We offer wide range of auto Auto Photo Colorimeters filter mains cum battery operated with inbuilt rechargeable battery. 

Specification:

  • Light Source 6.8v, 300mA
  • Power 230V + 10%, 50 Hz. AC
  • Std. Glass Filter 8
  • Mini Volume 1 ml.
  • Display 3 Digit, Bright Red 7 Segment LED
  • Range 400-700 nm
  • Output OD: (0 to 1.99), %T: 0 to 199
  • Resolution OD : 0.01, %T : 1%
  • Accuracy 0.5% FSI
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer, & of emissivity measurement apparatus.

Technical description:
  • The present set-up is designed to measure the emissivity of test plate. The test plate comprises of a mica heater sandwiched between two circular plates. Black plate is identical with test plate, but its surface is blackened. As all the physical properties, dimension and temperature are equal; heat losses from both plates will be same except radiation loss. Hence the input difference will be due to difference in emissivity. Both plates are supported on individual brackets in a enclosure with one side glass to ensure steady atmospheric conditions. Temperature sensors are provided to measure the temperature of each plate and surrounding. Electric supply is given to heaters through separate variacs so that temperatures of both can be kept equal and is measured with digital voltmeter and digital ammeter.
Learning objects/experimentation:
  • Determination of the emissivity of a test plate. Study the variation of emissivity of test plate with absolute temperature
Requirement for operation:
  • Electricity supply: 1 phase, 220 v ac, 4 amp.
Technical specification:
  • Table for set-up support.
  • Test plate diameter : 160 mm (approx.)
  • Black plate dia. : 160 mm (approx.)
  • Heater (2nos.): nichrome wire heater.
  • (one each for test plate & black plate)
  • Control panel comprising of
  • Digital voltmeter. : 0-300 volt.
  • Digital ammeter. : 0-2 amps.
  • Dpdt selector switches: for digital voltmeter & digital ammeter.
  • Variacs: 0-230 v, 2 amps, (2 nos.)
  • (one each for test plate and black plate).
  • Digital temp. Indicator: 0-3000c, with multi-channel switch
  • Temperature sensors: rtd pt-100 type.
  • With standard make on/off switch, mains indicator etc.
  • Instruction manual : an english instruction manual will be provided along with the apparatus
  • Cabinet to accommodate the slab assembly with front window of glass/acrylic.
  • The whole set-up is mounted on a powder coated base plate.
Control panel:
  • Standard make on/off switch, mains indicator etc.
Scope of delivery:
  • 1 self-contained “emissivity measurement apparatus” apparatus.
  • 1 instruction manual consisting of experimental procedures, block diagram etc.
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandAtico
ApplicationLaboratory Use
Wavelength Range (nm)190-1100 nm
Description:
7” High Resolution Touch Screen Lcd Color Graphical Display Supports Usb Pen Drive To Store / Retrieve Mass Spectral Data.Built-In Pc Control With Advanced Capability For Data Processing, Processing, Storage, Retrieval, Interpretation, Etc. Background Correction With D2 Lamp Source. Auto Burner Height Optimization, And Maximum Abs Adjustment Of Burner Through Membrane Keyboard. Auto Flame Control. Integral Microcontroller Based Auto Gas Box With All Safety Features.

Specification:
  • Integration Time 0.04 to 99 Sec
  • Accuracy +/-0.01 Abs at 1 Abs
  • Range 190 to 900 nm
  • PMT -200 to -1000 VHC Lamp 0 to 30 mA, modulated
  • Sample Feed Rate 3 to 8 mL/min (Adjustable)
Send Bulk Enquiry
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandAtico
ApplicationLaboratory Use
Size10mm

Description:
Digital Spectrophotometer is the most economical, reliable, rugged and accurate instrument for spectrophotometric analysis of any concentration. Digital Spectrophotometer operates at a wavelength range of 340 nm to 960 nm. The output is available on a 3 digit seven segment red LED display in terms of %Transmission (%T), Absorbance (Abs.), and Concentration (Conc.). It has a 3-Position rapid change cuvette (Test Tube Holder) selector. The cuvette holder can have 2 cuvettes for blank and sample or standard solution.

Features:
•Range 340 To 960 nm
•3 ½ Digital Display
•Highly Stable & Accurate
•10 mm Path Length
•Direct Concentration Facility

Specification:
Weight 15kg
Automatic grade Automatic

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Advanced technocracy inc. Is preparer,  &  of finned tube heat exchanger.
Technical description:
  • Heat exchangers are widely used in various industries. Finned tube heat exchanger is a tube-in-tube type heat exchanger. The inner tube is of stainless steel with fins on its outside surface. Hot water flows through inner tube and cold fluid flows through the outer tube. The flow rate of hot & cold fluid is measured with the help of rotameters. Inlet and outlet temperatures of fluids are measured with the help of digital temperature indicators. A magnetic drive pump is used to circulate the hot water from a recycled type water tank, which is fitted with heaters and digital temperature controller.
Learning objects/experimentation:
  •  To calculate the lmtd.
  •  To find heat transfer rate
  •  To find out overall heat transfer co-efficient.
Requirement for operation:
  •  To calculate the lmtd.
  •  To find heat transfer rate
  •  To find out overall heat transfer co-efficient.
Technical specification:
  •  System : water to water, concentric tube type
  •  Inner tube : dia 32 mm approx., length 500mm. (made of stainless steel)
  •  Longitudinal fins: width 20mm, length 500mm, 6 nos. (made of stainless steel)
  •  Water flow measurement : rotameters for hot and cold fluid
  •  Hot water tank: made of stainless steel double wall, insulated with ceramic wool.
  •  Hot water circulation: magnetic pump made of polypropylene to circulate hot water maximum working temperature is 85°c.
  •  Heaters: 2 kw nichrome wire heater (2 nos.)
  •  Control panel comprising of: digital temp. Controller: 0-199.90c. (for hot water tank)
  •  Digital temp. Indicator: 0-199.90c, with multi-channel switch
  •  Temperature sensors: rtd pt-100 type.
  • With standard make on/off switch, mains indicator etc.
  •  Instruction manual : an english instruction manual will be provided along with the apparatus
  •  A good quality painted rigid ms structure is provided to support all the parts
Control panel:
  •  Standard make on/off switch, mains indicator etc.
Scope of delivery:
  •  1 self-contained “finned tube heat exchanger” apparatus.
  • 1 instruction manual consisting of experimental procedures, block diagram etc
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Heat Transfer In Agitated Vessel

Technical Description:

In most industrial processes including reactors, heat is to be added or extracted to control the process. The addition and removal of heat is done by passing steam or water in a jacket fitted to the outside of the vessel or passing steam or cold water in helical coil inside the vessel. For effective heat transfer and even distribution of heat, the liquid inside is continuously agitated. The present set-up offers us a comparative study of Jacket & Helical coil, which can be operated simultaneously. It is a stainless steel jacketed vessel with helical coil of copper is fitted inside. A variable speed stirrer is fitted in the vessel. Variation in temperature of inside water is measured and is noted. Set-up is fitted with steam traps for condensate collection. Flow rate of water can be controlled and measured using valve and Rota meter. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors.

 

LEARNING OBJECTS/EXPERIMENTATION:

  • To determine the overall heat transfer co-efficient for various degree of agitation.
  • To make a comparative study of Heat Transfer through Jacket & Coil in an agitated vessel.

 

REQUIREMENT FOR OPERATION:

  • Water supply 20 lit/min (approx.) and Drain.
  • Electricity Supply : 1 Phase, 220 V AC, 5 kW.

 

TECHNICAL SPECIFICATION:

  • System : Steam to Water
  • Vessel : Material stainless steel fitted with 4 baffles
  • Dia. 250, Depth 350 mm (Approx.)
  • Jacket : Width 25 mm. Insulated with ceramic wool and cladded
  • with aluminium foil.
  • Helical Coil: Material Copper, OD 16mm, ID 13mm.
  • Agitator: Stainless steel Impeller fitted on a shaft coupled to a variable
  • Speed motor and Drive.
  • Condensate Measurement: Measuring Cylinder & Stopwatch
  • Water Flow Measurement: Rota meter.
  • Steam Generator: Made of stainless steel fitted with level indicator, pressure Gauge, safety valve, drain and insulated with ceramic wool & cladding with Aluminium foil.
  • Heaters: Nichrome wire heater (2 Nos.)
Send Bulk Enquiry
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
ApplicationResearch Use, Clinical Use, Hospital Use
BrandAtico
AutomationSemi Automatic

Description:
Biochemistry Analyzer is not just a standard photometer; it is a true new generation semi-automatic biochemistry analyzer capable of performing Routine Biochemistry, Hormonal assay, Electrolytes, Therapeutic drugs and Drug-enzyme investigations. We manufactures the high quality and cost effective Biochemistry Analyser at very affordable price.

Specification:
Application Research Use, Clinical Use, Hospital Use
Automation Grade Semi-Automatic, Automatic
Programmable Test Memory 300 Tests
Display 7 inch Touch Screen
Type Biochemical Analysis System
LCD display Size 240 x 128 LCD display

Features:
• Touch screen, friendly use.
• Biochromatic optic system with 7 wavelengths
• Customer can evaluate validity of the result  quickly by checking the slams symbol of each  result.
• Test Method: aid point, kinetic, fix time, dual  wavelength
• Multi standard calibration, you can choose the  formula linearity, quadratic curve, power function curve, exponential function curve. logarithmic function and cubic spline curve.
• Real-time dynamic graphic display.
• Internal thermal printer
• Large memory to store up to 200 test program, more than 10,000 test results

Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
ApplicationLaboratory Use
Wavelength Range (nm)325-1100 nm
Description:
Flourscence Spectrophotometer is a type of electromagnetic  Spectrophotometer that analyzes fluorescence from a sample. It involves using a beam of light, usually ultraviolet light, that excites the electrons in molecules of certain compounds and causes them to emit light; typically, but not necessarily, visible light. A complementary technique is absorption Spectrophotometer.

Specification:

• Application Industrial Use, Laboratory Use
• Light Source LED
• Central wavelength 365 nm
• Emission monochromator 360 ~ 650 nm (C ~ T diffraction grating )
• Variation of power source 220 V + 22 V 50 Hz
• Interface RS 121 serial port
• Printer Serial printer/jet printer (for PC)
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
ApplicationLaboratory Use
Size600 x 450 x 200mm
Wavelength Range (nm)190-1100 nm
Technical Description:
We introduces the first double beam spectrophotometer with a variable spectral bandwidth into the Jenway range. The highly stable optics and two detectors measure the sample and reference simultaneously optimising measurement accuracy. The 6850 has measurement modes for photometrics, concentration, multi-wavelength, spectrum scanning, kinetics, quantitation, DNA/RNA and protein analysis.

Specifications:

•Wavelength range 190 to 1100nm
•Wavelength resolution 0.1nm
•Wavelength accuracy ± 0.3nm (at 0.5 and 1nm bandwidth) ± 0.5nm (at 2, 4 and 5nm bandwidth)
•Wavelength reproducibility ± 0.2nm
•Spectral bandwidth Variable 0.5, 1, 2, 4, 5nm
•Photometric range - 0.3 to 3.0A 0 to 200%T
•Photometric accuracy ± 0.002A (0- 0.5A) ± 0.3% T (0- 100%T)
•Photometric reproducibility ± 0.001 Abs (0 to 0.5 Abs) ± 0.002 Abs (0.5 to 1.0 Abs) 0.15%T (0- 100%T)
•Resolution 0.1%T, 0.001A
•Stray light < 0.05%T at 220 and 360nm
•Noise 0.0005A
•Stability ± 0.001A/h at 500nm after 15 min warm up
•Multi-wavelength Up to 10 wavelengths, up to 20 wavelengths with PC software
•Calculations Ratio, difference, formulae with factors
•Spectrum range Any range between 190 and 1100nm
•Scan speed 100 to 2000nm/min
•Scan interval 0.1, 0.2, 0.5, 1, 2 or 5nm
•Analysis Auto peaks and valleys, zoom . Addition, subtraction, peak ratios, smoothing, area under curve, wavelength table, derivatives, overlay with PC software
•Kinetics Up to 12 hours with time intervals of 0.1, 0.2, 0.5, 1, 2, 5, 10 or 30 seconds
•Analysis Slope and formula of line of best fit between any two points
•Quantitation points Up to 3 wavelengths
•Quantitation Calibration Blank with up to 10 standards or factor
•Concentration range 0- 99999
•Calibration Blank with standards or factor
•DNA/ RNA and Protein DNA/RNA Ratio, concentration, A320 correction
•Light source Tungsten halogen and Deuterium lamps
•Lamp changeover 325 to 370nm selec table
•Outputs USB and parallel
•Operating system: Windows 2000, XP, Vista, Windows 7
•Electrical supply 120VA, 220/ 110V, 50/ 60Hz
•Size (w x d x h) 600 x 450 x 200mm
•Weight 22kg
Send Bulk Enquiry
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO
Display Type128 X 64 Graphical LCD
Power Source12V/2A DC Supply
Resolution0.01 ml
Application Laboratory Use
Display128X64 Graphical LCD
Automation GradeAutomatic
ConditionNew
PortableYes

Description:
Microprocessor Karl Fischer Titrimeter apparatus is designed for determination of moisture content in solid/liquid samples. Moisture of sample is titrated with Karl Fischer reagent which is added precisely by a motorized pumping system.

Specifications:

  • Reagent Bottles 250 ml bottles for KF Reagent, methanol & calcium chloride
  • PC connection compatibility USB Hyper terminal
  • Data Storage 1000 Sample
  • Display 128 x 64 Graphical LCD
  • Keypad 20 keys
  • Wait Time for End Point Adjustable 1 to 99 seconds
  • Utilization environmental temp. 5-40degreeC Humidity: 585%
  • Indication of Titrant Volume 0.00 to 99.99 ml
  • Resolution of Titrant Volume 0.01 ml
  • Model LT-630
  • Application Industrial Use, Laboratory Use
  • Power Supply 12V/2A DC Supply
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price
Product Details:
UsageIndoor Type
BrandAtico
ConditionNew

Description:
We are recognized as the leading offered of superior quality range of Touch Screen Bio Chemistry Analyzers. Our offered product range is precision engineered and is made using the finest grade raw material and sophisticated technology. These Touch Screen Bio Chemistry Analyzers are highly appreciated by our esteemed customers for their design, durability. Our quality controllers conduct series of tests to assure their flawlessness before dispatch.

Specification:

  • Application Research Use
  • Automation Grade Semi-Automatic
  • Features Bench-Top
  • Programmable Test Memory 248 Tests
  • Optical support 340, 405, 450, 505, 546, 578, 630 nm
  • Display 7" tft lcd with touch screen
  • Memory 300 programs, 200000 results
  • Temperature control Peltier control, room temperature, 25 degree c , 30 degree c & 37 degree c
  • Optical 340,405,450,505,546,578,630 nm 2 extra filters are optional.
  • Room Temperature 25 Degree c , 30 Degree c & 37 Degree c
  • Photometric Range 0. 0000 - 3. 0000 ABS
  • Resolution 0. 0001 abs
  • Light source 6v/10 w halogen lamp
  • Keyboard Connectivity
  • Power requirement Wide power supply ac -100 - 240 v, 50/60 hz.
  • Interface 4 usb slave, 1 usb host, 1 ethernet port
  • Printer Build in thermal printer
Send Bulk Enquiry
REQUEST CALLBACK
Ask Latest Price

Technical Description:

Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be adjusted by operating the needle valve and measured by Rotameter. The compressed air is used for circulation of feed. It is a helical coil tube type plug flow reactor made up of Stainless steel pipe. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis.For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is provided. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.

Learning Objectives/Experiments:

  • To plot RTD curve for Plug Flow Reactor
  • To determine the Dispersion No.

Required for Operation: 

  • Compressed Air Supply at 2 Bar, 0.25 CFM.
  • Water Supply.
  • Drain.
  • Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Specifications:

  • Reactor: Material Stainless Steel, Capacity 0.7 Ltrs. (Approx)(Helical Coiled Tube Type)
  • Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs.
  • Feed Circulation: By compressed air.
  • Flow Measurement: Rotameter.
  • Piping: Material Stainless Steel and PVC.
  • Pressure Regulator:0-2 Kg/cm2
  • Pressure Gauge: Bourdon type 0-2 Kg/cm2
  • Stop Watch: Electronic
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

Scope of Delivery: 

  • 1 Self-contained "RTD STUDIES IN PLUG FLOW REACTOR (COILED TUBE TYPE)" Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
Send Bulk Enquiry
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandAtico
TypeDigital
pH Range0 to 14
Accuracy (Ph)+ 0.01 pH + 1 digit mV, Temp + 0.10
Display16X2 alpha numeric LCD display
Power (Volt)230V + 50Hz
Resolution (Ph).01 pH 0.1 mV Temp. 0.1 Deg. C

Description:
A research grade instrument with 16 X 2 alpha numeric LCD display having auto temperature compensation, auto buffer recognition along with accessories. Its features include 3 point calibration. Data Storage facility upto 1000 samples, complete with pH electrode, temperature probe, electrode stand, dust cover & Instruction Manual, computer interface with USB.

Specification:

  • Type Digital
  • Type of PH Meter Table-Top
  • pH Range 0-14
  • Display 16 x 2 alpha numeric LCD display
  • Range 0 to 14 pH 0 to + 1999.9 mV, Temp. 0 to 100oC
  • Resolution .01 pH 0.1 mV Temp. 0.1 Deg. C
  • Accuracy + 0.01 pH + 1 digit mV, Temp + 0.10
  • Calibration Auto / Manual
  • Storage Upto 100 samples
  • Power 230V + 50Hz

 


    Send Bulk Enquiry
    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandAtico
    ApplicationLaboratory Use

    Specification:

    • Display Digital
    • Display 262x340x165 mm (Approx.)
    • Test Tube A set of 5.


    Send Bulk Enquiry
    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandAtico
    ApplicationLaboratory Use
    CustomizedYes
    Display20 x 4 Alphanumeric backlit LCD display
    Power Supply230 V + 10% AC, 50 Hz
    Size (Millimeter)365 x 245 x 220 mm (L x B x H) (Approx.)
    Voltage (Volt)230 V + 10% AC, 50 Hz
    Weight (Kilogram)7.5 Kg. (Approx.)
    Accuracy+ 2% FS
    Automation GradeAutomatic
    ConditionNew
    Dimension (mm)365 x 245 x 220 mm (L x B x H) (Approx.)
    Display Type20 x 4 Alphanumeric backlit LCD display
    PortableYes
    Power (Volt)230 V + 10% AC, 50 Hz

    Description:
    Microprocessor Flame Photometer, is an ideal instrument for the determination of sodium, Potassium, Calcium and Lithium. It uses the latest Microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility. It has soft touch membrane key for ease of operations. the solution is aspirated through an automiser, Air sample and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. The color of the flame is changed depending upon the concentration of elements present. Radiations from the flame passes through the sensing system and specific narrow band interference filter which permits only the characteristic radiation to pass to the photo-detector. 

    Features:

    • Microprocessor Based with Printer Interface
    • Auto Gas Cutoff (Model - 1385)
    • Auto Flame Failure Detection (Model - 1385)
    • Four Measurements in Single Aspiration
    • Setup Storage Facility
    • Sample Data Storage Facility
    Specification:
    • Weight Main Unit : 7.5 Kg. (Approx.)
    • Curve Fit Accuracy + 2% FS
    • Resolution 0.1 ppm/meq
    • Dimensions 365 x 245 x 220 mm (L x B x H) (Approx.)
    • Power 230 V + 10% AC, 50 Hz
    • Automiser Axial flow type
    • Ignition System Auto Ignition
    • Calibration Upto 5-Point Calibration with curve fitting software
    • Detector Silicon Photodiode
    • Flame System LPG & dry oil free air
    • Display 20 x 4 Alphanumeric backlit LCD display
    Send Bulk Enquiry
    Save time! Get a Best Deal

    *Your information is safe with us.

    REQUEST CALLBACK
    Ask Latest Price

    Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Computerized Multi-Fuel Research Engine Test Setup

    Description:

    The test setup consists of Single Cylinder, 4 stroke Engine coupled to a dynamometer. The engine is modified such that engine head can be lifted or lowered so that clearance volume & hence compression ratio can be changed. The dynamometer provides variable load on engine to study engine performance under variable load conditions. The engine is further modified so that petrol & diesel can be used as fuel. The engine is fitted with ignition coil & throttle body while running on petrol as fuel. Exhaust gas calorimeter is used for estimation of heat carried away by exhaust gases for determination of heat balance of the engine.

    The instrumentation console includes measuring instruments for Engine Speed, Torque, Air consumption, Fuel Consumption, temperature & cooling water flow rates. The parameters are recorded by the sensors & transmitted to Data Acquisition Device. The Data Acquisition Device sends the data to computer & which is displayed in the Data Acquisition Software.

    Windows based software developed in LabView Platform is capable of displaying real time acquired data & results are displayed in tabular & graphical format.

     

    Experimental Capabilities:

    • Determination of brake power & mechanical efficiency at different load conditions.
    • To study effect of change in compression ratio on Engine performance.
    • Determination of fuel consumption & brake specific fuel consumption, brake thermal efficiency.
    • Determination of air consumption & volumetric efficiency, Air/Fuel Ratios.
    • Calculation of Heat balance of the engine.
    • To study P-V Diagram & P-q diagram for Petrol / Diesel engine.
    • To study Fuel Injection timing diagram for Diesel Engine
    • Study of Open ECU & Performance optimization with ECU programming

     

    Technical Specifications:

    • Engine: Single cylinder, 4 stroke, water cooled, stroke 110 mm, bore 87.5 mm, 661 cc, Electric Start with Battery & Alternator, Diesel mode: 3.5 KW, 1500 rpm, CR range 12-18. Injection variation:0- 25 BTDC, Petrol mode: 4.5 KW@ 1800 rpm, Speed range 1200-1800 rpm, CR range 6-10
    • Dynamometer: Eddy current dynamometer, Water cooled, Capacity 7.5 kW with electronic controller
    • Propeller Shaft: With universal joints
    • Air Box: M S fabricated with orifice meter
    • Fuel Tank: Capacity 10 lit, Type: Duel compartment, for petrol & diesel
    • Exhaust Gas Calorimeter: Pipe in Pipe Type
    • Sensor: Combustion: Range 100 Bar, Diesel line: Range 350 Bar, (Make PCB or equivalent imported)
    • Crank Angle Sensor: Resolution 1 Deg, Speed 5500 RPM with TDC pulse (Make Autonics / equivalent)
    • Temperature Sensor: Type RTD, PT100 and Thermocouple, Type K
    • Load Sensor: Load Cell, Strain Gauge Type Range 0-50 Kg for Torque Measurement.
    • Fuel Flow Transmitter: Level sensor, Range 0-500 mm
    • Air Flow Transmitter: Pressure transmitter, Range (-) 250 mm WC
    • Rotameter: Engine cooling & Calorimeter cooling, Range 60-600 LPH

     

    Send Bulk Enquiry
    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandAtico
    ApplicationLaboratory Use
    Wavelength Range (nm)190-1100 nm
    Description:
    AUTOMATIC 8 CELL HOLDER HOLDER with Range 190-1100 nm, fully automatic operation, Bandwidth 1 nm, automatic wavelength calibration, & wavelength scan, automatic peak picking & spectrum display. Large Screen with graphic display. Spectrum and data can be printed out by printer and sent to computer via USB Port. Set of 4 Quartz Cuvettes and 4 Glass Cuvettes are provided. Software Included.

    Specification:
    • Wavelength Range (nm) 190-1100 nm
    • Detector Silicon Photodiode
    • Stability + 0.001Baseline Flatness + 0.001 A
    • Noise 0.0005 A
    • Scanning Speed Fast/Medium/Slow
    • Wavelength Scanning Auto
    • Display 320 * 240 LCD
    • Spectral Bandwidth 1 nm
    • Wavelength Accuracy 0.3 nm
    • Wavelength Repeatability 0.1 nm
    • Optical Sytem Double Beam, Grating 1200 lines/mn
    • Stray Light 0.05 % T
    Send Bulk Enquiry
    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandATICO
    ApplicationLaboratory Use
    SizeLT-2802
    Wavelength Range (nm)190-1100 nm

    Description:
    Double Beam Microprocessor UV-VIS Spectrophotometer Range 190-1100 nm, fully automatic operations, automatic 8 cell changer, bandwidth 1nm, automatic wavelength & wave length scan, automatic peak picking & spectrum display, Large screen with graphic display. Spectrum and data can be printed out by printer and sent to computer via USB port. Set of 4 quartz and 4 glass cuvettes is provided, Software included, fitted with Japanese optics (Imported)

    Technical Specifications:
    Wavelength Range (nm) 190-1100 nm
    Wavelength Range 190-1100 nm Czerny TurnerOptical System Double beam (1200 lines/mm Grating)
    Photometric Range -0.3 - 3.5 A, 0 to 220 %T
    Wavelength Accuracy +0.3 nm
    Display 6 inches high light blue LCD
    Scanning Speed Fast / Medium / Slow

     

     

    Send Bulk Enquiry
    Save time! Get a Best Deal

    *Your information is safe with us.

    REQUEST CALLBACK
    Ask Latest Price

    Description

    Two main components from main parts of the test rig. Welded steel base plate, complete with Rope Brake Dynamometer/ A.C. DC Generator /Eddy Current Dynamometer provided with cooling water arrangement. Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement system, temperature and speed indicator.

     

    Dynamometer (as applicable)

    The Dynamometer used is a Mechanical Brake capable of absorbing a maximum load of 5HP at a speed of RPM.

    The Loading device used is an AC Alternator of matching capacity to load the engine upto 5HP at 1500 RPM along with Resistance loading arrangement with selector switches.

    DC Generator of matching capacity to load the engine up to 5 HP at 1500 RPM along with Resistance loading arrangement provided with selector switches.

    The loading device used is an Eddy Current Dynamometer of matching capacity to load the engine upto HP at 1500 RPM.

     

    Instrumentation (as applicable)

    • The following instrumentation is provided.
    • 'U' tube manometer for air flow rate
    • Burette for fuel flow rate
    • Digital Temperature Indicator-Multi point indicator with thermocouples.
    • Digital Voltmeter, Ammeter

    Controls

    The test rig is arranged for manual control with Hand cranking start arrangement for engine starting.

     

    Fuel measuring arrangement

    Fuel Measuring Arrangement consists of fuel tank, burette and suitable cock all mounted on a suitable framework and panel board and supplied with fuel piping from fuel tank to Engine.

     

    Air intake measurement & heat carried away by exhaust gas

    Consisting of an air tank mounted on an iron stand fitted with a suitable orifice plate, manometer, Thermocouple for measuring the exhaust gas temperature with pocket connection with instruments suitably mounted on a panel board.

     

    Heat carried away by cooling water

    Consists of suitable inlet and outlet piping with flow control valve. Rota meter to measure the rate of flow of cooling water and Thermocouple with pocket connections for measuring inlet and outlet water temperature.

     

    Engine

     

    Single Cylinder Four Stroke Water Cooled Vertical Diesel Engine to develop 5 HP @ 1500 RPM.

    Send Bulk Enquiry
    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandAtico
    ApplicationLaboratory Use
    Wavelength Range (nm)190-1100 nm
    Description:
    The main unit of the spectrophotometer can analyze for photometric measurement, quantitative measurement, spectrum scan, DNA/Protein analysis and can print data. When connected to a computer the UVWin software adds many additional functions, such as 3D spectrum analysis, GLP laboratory protocol. It can be applied in pesticide residue detection, environment protection, inspection, quarantine and other fields. 21 CFR Part 11 compliance software (optional).

    Specification:
    Position selector control 10 mm path length cuvettes
    Packaging Cardboard Box
    Spectroscopic methods Single Beam

    Features:

    • Precision designed and accurate functioning based UV Spectrophotometers
    • Providing working as single beam microprocessor UV/VIS spectrophotometers
    • Coming with facility for % Transmission, Absorbance & K Factor measurement
    • Also featuring support of automatic concentration
    • Coming with 4 position selector control for 10 mm path length cuvettes and sample holder support
    • Allows easy interfacing with any printer (RST 232C)
    • System offered system with support of imported software & set of 2 quartz and 4 glass cuvettes
    Send Bulk Enquiry
    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandAtico
    ApplicationLaboratory Use

    Description:
    A photoelectric flame photometer is a device used in inorganic chemical analysis to determine the concentration of certain metal ions, among them sodium, potassium, lithium, and calcium. Group 1 and Group 2 metals are quite sensitive to Flame Photometry due to their low excitation energies.

    Specification:

    • Power Electronic
    • Measurement Range Flame Photometer,
    • Wavelength Range Flame Photometer

     

    Send Bulk Enquiry
    Save time! Get a Best Deal

    *Your information is safe with us.

    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandAtico
    ApplicationLaboratory Use
    Wavelength Range (nm) 325-1100 nm
    Description:
    Microprocessor Spectrophotometer is a solid state microcontroller based instrument designed for quick and accurate spectrophotometric analysis of any concentration. It operates at a wavelength range of 325 nm to 1000 nm. The output is available in terms of %Transmission (%T), Absorbance (Abs.), Concentration (Conc.) and K factor. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.This is the most economical, reliable, rugged and accurate instrument. The system has 4 soft touch membrane type keys for ease of operation. It has a 'Mode' key for easy switching of various operating modes. Facility for automatic setting of zero / blank is provided. Provision has also been made for attachment of any dot matrix printer using centronics interface and PC connectivity through USB port.

    Specification:
    • Photometric Accuracy + % T
    • Wavelength reproducibility 1 nm
    • Stray Light - 0.097-2.000A, 0~1999 C
    • Light Source Tungsten - halogen lamp 6V/10WOptical System Single Beam, Grating 1200 lines/mm
    • Data Output RS 232CPower 220V, 50 Hz.Spectral bandwidth 5 nm
    • Wavelength Range 325 - 1000 nm
    • Wavelength Accuracy + 2.0 nm
    Send Bulk Enquiry
    REQUEST CALLBACK
    Ask Latest Price
    Advanced technocracy inc. Is preparer, & of unsteady state of heat transfer.

    Technical description:
    • The apparatus consists of a small test cylinder. The cylinder is heated by a constant temperature water bath, till steady state is reached. During heating, temperature of the cylinder is function of time and hence, heating of cylinder is under unsteady state heat transfer.The temperature of cylinder is measured with the help of temperature sensor inserted in the centre. The hot water bath is provided with a heater and is controlled by digital temperature controller. An agitator is also provided to maintain the constant bath temperature.
    Learning objects/experimentation:
    • To calculate the biot number, fourier number and hence the heat transfer coefficient.
    • To plot heisler chart for the given sample of cylindrical solid.
    Requirment for operation:
    • Electricity supply: 1 phase, 220 v ac, 1 kw.
    • Bench area of 1.5 m x 1.5 m.
    Technical specification:
    • Water bath: material - stainless steel capacity-8 lit. (approx.)
    • Stirrer for bath: stainless steel impeller with shaft coupled to a fhp motor.
    • Heater : nichrome wire heater
    • Test cylinder: one each of stainless steel & brass.
    Control panel comprises of :
    • Digital temp. Controller: 0-199.90c, (for water bath)
    • Digital temp. Indicator: 0-199.90c, temperature sensors : rtd pt-100 type
    • With standard make on/off switch, mains indicator etc.
    • Instruction manual : an english instruction manual will be provided along
    • With the apparatus.
    • The whole set-up is well designed and arranged on a powder-coated structure.
    Control panel:
    • Standard make on/off switch, mains indicator etc.
    Scope of delivery:
    • 1 self-contained “unsteady state heat transfer unit” apparatus.
    • 1 instruction manual consisting of experimental procedures, block diagram etc.
    Send Bulk Enquiry
    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandAtico
    ApplicationLaboratory Use
    Wavelength Range (nm)190-1100 nm

    Description:

    These single beam spectrophotometers can successfully realize high accuracy and reliability measurements to meet various application requirements.
    They can be used extensively for qualitative and quantitative analysis in various fields, namely biochemical research, industrial pharmaceutical analysis and production, education, environmental protection, food industry clinical examination, sanitation and anti-epidemic.
    The standard single beam spectrophotometers feature a microprocessor control, tungsten halogen lamp and LCD display. The wavelength accuracy is 2nm while the reproducibility is 1nm. Three options for spectral bandwidth are available, being 5nm, 2nm and 1nm, to best meet user’s needs.

    Specification:

    • Optical System Single Beam, Grating 1200 lines/mm
    • Stability +0.002A/h @ 500nm
    • Stray Light 0.3%T @220nm, 360nm
    • Data Output Port USB
    • Printer Port Parallel Port
    • Power Requirement AC220V/50 Hz
    • Wavelength Range 190-1000nm
    • Band Width 1 nm
    • Wavelength Accuracy +/-0.5 nm
    • Wavelength Repeatability +0.1nm
    • Wavelength Setting Automatic
    • Photometric Accuracy +/-0.1 %T
    • Photometric Repeatability +0.3 %T
    • Photometric Display Range -0.3-3.0A,0-200%T, 0-9999C

     

    Send Bulk Enquiry
    Save time! Get a Best Deal

    *Your information is safe with us.

    REQUEST CALLBACK
    Ask Latest Price
    Product Details:
    BrandAtico
    Dimension (mm)195 X 235 X 105 mm
    Range (mm)400 - 700 nm
    Resolution (%)OD : 0.01
    Automation GradeAutomatic
    ConditionNew
    Description:
    With the hard work of our highly skilled professionals, we have been able to carve a niche for ourselves in manufacturing, supplying and exporting Digital Photo Calorimeter. These calorimeters are made with optimum quality raw material, procured from the reliable sources of the industry. Our quality experts check all the products on various parameters to ensure flawlessness. Digital Photo Calorimeter finds its application in pharmaceutical industry and clinical labs.

    Features:
    • Rugged structure
    • Accurate reading
    • Easy to operate
    • Good battery backup

    Specification:
    • Type Blood Testing Instruments
    • Application Blood Testing Instruments
    • Resolution OD : 0.01Range 400 - 700 nm
    • Dimensions (L x B x H) 195 X 235 X 105 mm

      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      ApplicationLaboratory
      Weight (kg)30kg
      Light SourceInfrared LED
      Wavelength (nm)589.44nm
      Voltage (Volt)230V
      Weight (Kilogram)30kg
      Automation GradeAutomatic
      ConditionNew
      Dimension (mm)600mmx320mmx240mm
      PortableYes
      Power (Volt)230 V

      Description:
      Digital Polarimeter combines the latest in Optoelectronic technology with over 40 years of experience in Precision Analytical Instruments to introduce for the first time in India, a locally manufactured, affordable, low cost, fully Automatic Digital Polarimeter.

      Specification:
      Measurement Range -45degree - +45degree, -120 degreeZ + 120 degreeZ
      Minimum Reading 0.001 degreeZ and 0.01 degreeZ
      Interface RS232

      Features:
      •Fully Automatic Readout of Optical Rotation
      •Specific Optical Rotation
      •Concentration
      •International Sugar Scale
      •Large Multifunctional LCD Display
      •Easy Interactive Setup Menu
      •RS-232 Output Port

      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      ApplicationLaboratory
      Size730mmX450mmX370mm
      Weight (kg)36kg
      DisplayLCD
      Weight (Kilogram)36kg
      Automation GradeAutomatic
      ConditionNew
      PortableYes

      Specification:
      Measurement range 45degree" +45degree, -120degree- + 120 degreeZ.
      Automatic Grade Automatic

      Send Bulk Enquiry
      Save time! Get a Best Deal

      *Your information is safe with us.

      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      ApplicationLaboratory Use

      Description:
      The systems are utilized for various regular Isocratic separations and quality assurance applications. Designed and developed using high-grade stainless & bio compatible peek material, these devices are at par with the requisite industrial norms and standards. Clients can avail thee entire range from us at most economical prices. 

      Specification:

      • Body Material Stainless Steel
      • Weight 20kg or customized
      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      ApplicationLaboratory Use
      Power (W)Electronic

      Description:
      Colorimetric system for online monitoring of boiler feedwater, steam and condensate analysis.

      Specification:

      • Usage Auto Testing Machine
      • Power Electronic
      • Type Blood Analysis System
      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      ApplicationHospital, Clinical
      BrandAtico
      Operation ModeAutomatic
      Number of Chambers1

      Description:
      We are a reputed entity, engaged in offering a qualitative array of Fully Automatic Hematology Analyzer.

      Specification:

      • Application Hospital, Clinical
      • Chamber Single
      • Differential Type 2-Part, 3-Part
      • Operation Mode Semi-Automatic, Automatic
      • Large storage Up to 30 thousand results with histogram.
      • Touch scree with 640 * 480 LCD Display
      • Automatic Grade Fully Automatic
      Send Bulk Enquiry
      Save time! Get a Best Deal

      *Your information is safe with us.

      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      TypeDigital
      Display Type3 Digit LED display
      Type of PH MeterPortable
      ConditionNew

      Description:
      Handheld pH meters are valuable in obtaining accurate pH measurements of diverse chemical solutions in regulated environments due to their compact and portable format. Water testing, cosmetics, and pharmaceutical industries benefit from handheld pH meters. Functional features of most battery operated models include pH/ion measurement, data transferring, and comprehensible displays. Additionally, pre-defined buffer sets make taking measurements easier in controlled situations.

      Specification:

      • Type Digital
      • Dimensions 85 x 28 x 165
      • Power 1 x 9V Battery
      • Slope Correction 80 to 120%
      • Compensation Manual 0 to 100 Degree
      • Display 3 1/2 digit LCD
      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      DisplayDual Digital Display
      Range400 ~ 700 nm
      Volume (Millilitre)1 ml. minimum
      Accuracy+ 0.01 O.D.
      Automation GradeAutomatic
      ConditionNew
      PortableYes
      Dimension (mm)L 210 X B 160 X H 80 mm (approx.)
      Display TypeDual Digital Display
      Light SourceHighly Accurate Laser Source
      Range (mm)400 ~ 700 nm
      Weight (kg)1.5 Kg. Approx

      Description:
      Backed with support of professionals, we are involved in providing a faultless range of Digital Colorimeter to the valuable patrons. We offer this product in different specifications that meet on patron’s demand.

      Specification:

      • Range 400 ~ 700 nm
      • Detector Silicon Photodiode
      • Accuracy + 0.01 O.D.
      • Stability + 0.02 O.D. Per Hour
      • Light Source Highly Accurate Laser Source
      • Volume 1 ml. minimum
      • Dimension L 210 X B 160 X H 80 mm (approx.)
      • Weight 1.5 Kg. Approx
      • Battery Backup 6 V Ni CD Re-chargable Battery
      • Display Dual Digital Display
      • Display Model Absorbance & Wavelength
      • Filters Built in 9 Digital filters 30,000 hours Life
      • Filter Wavelength 400 nm, 430 nm, 500 nm, 520 nm, 540 nm, 580 nm, 600 nm, 620 nm, 680 nm
      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandATICO
      ApplicationLaboratory Use
      Automatic Grade Automatic
      Display Type Digital
      ConditionNew
      Dimension (mm)360 X 295 X 175 mm
      Description:
      It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg H2O. The system has 24 soft touch membrane type keys for ease of operation. 

      Features:• Auto Computation of Moisture in ppm, % mg H2O.• Storage of Date, Time, Batch No. and Final Results• 8-Digit Digital Display• Motorized Dispensing• External Printer Attachment Facility

      Specification:
      Measuring Range   10 ppm to 100% of moistureK.F. Dispensing   Highly sensitive motorized dispensing system.Resolution of Titrant Volume 0.01 mlIndication of Titrant Volume 0.00 to 99.99 ml on displayMoisture content calculation (Automatic) %age : (0.00 to 100%) ppm :: (10 to 9999999) mg H2O : (0.00 to 999.99)Display 8 digit bright red seven segment displayClock In-built clock with date time displayStirrer In-built Magnetic stirrer with adjustable speedReagent Bottle 3x250ml bottle for KF Reagent, methanol calcium chloridePower Supply 230V A.C ± 10% 50 HzDimensions 360 x 295 x 175 mm
      Send Bulk Enquiry
      Save time! Get a Best Deal

      *Your information is safe with us.

      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico

      Descriprtion:
      Microprocessor Viscometer Its with led display  Measurement range is 10-1 x 105 MPA.S with 4 spindles, 6/12/30/60 rotor speed (rpm), + 5 % Newtonian fluid  Provided with RS232c interface Microprocessor Viscometer, Microprocessor Viscometer exporters, HMicroprocessor Viscometer manufacturers.

      Specification:

      • Spindles 4 spindles,
      • Rotor Speed (rpm) 6/12/30/60 rotor speed (rpm)
      • Newtonian fluid + 5 % newtonian fluid
      • Interface. RS232c interface.

       

       

      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      ApplicationLaboratory Use
      Type Portable
      Automation Fully Automatic
      Features:
       
      • Touch screen, friendly use.
      • Biochromatic optic system with 7 wavelengths
      • Customer can evaluate validity of the result  quickly by checking the slams symbol of each  result.
      • Test Method: aid point, kinetic, fix time, dual  wavelength
      • Multi standard calibration, you can choose the  formula linearity, quadratic curve, power function curve, exponential function curve. logarithmic function and cubic spline curve.
      • Real-time dynamic graphic display.
      • Internal thermal printer


      Specification:

      Weight 8kg.Photometric range -0. 2 - 2. 3 abs.Temperature 0degreeC-40degreeCRelative humidity 10%-90 %.
      Power 85-264VDimension 33cm in length*35. 5cm in width*12. 59cm in height
      Communications connector RS-232 serial.Volume More than equal to 500ULScreen 240*128 dots graphic LCD.Liquid thickness 10mm.lamp quartz-halogen lamp, 6V 10W.Measure volume 32ULLFlow cell quartz .
      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      Features:
       
      • Adjustable pressure hot lid to prevent volatilizing and dewing.
      • Heat lid with pressure alarm device, to prevent damaging test tube by too much pressure.
      • Convenient and flexible module replacement mode.
      • Innovative module wire socket design achieves module replacement without wire.
      • The unique left-right design for amplification area and operating area.
      • A colored and wide screen displaying Multiple details.
      • Perform 20000 times non-breakdown operation.


      Specification:
      Max. constant temperature 59m59sBlock Capacity 61 x 0.2 ml or 36 x 0.5 ml Stores Program No. 99h59mStored Program No. 100Dimension 370 mm (L) x 249 mm (W) x 180 mm (H)Weight 5kgTemperature Range 4degreeC to 99degreeCMax. Heating Rate 2.5 degreeC/s Temperature display accuracy 0.1degreeCMax. Program unit 9Max. Cycle No. 99
      Send Bulk Enquiry
      Save time! Get a Best Deal

      *Your information is safe with us.

      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      ApplicationLaboratory Use
      Wavelength Range (nm)190-1100 nm
      Description:
      Single Beam UV-Vis Spectrophotometer, Range 195 to 1000 nm with facility for automatic concentration, % Transmission, Absorbance & K Factor measurement. Automatic wavelength calibration and selection. It has sample holder with 4 position selector control for 10 mm path length cuvettes. Facility has been provided for interface with any printer (USB PORT). Set of 2 quartz and 4 glass cuvettes is provided.

      Specification:

      • Data Output Port USB
      • Optical System Single Beam, Grating 1200 lines/mm
      • Display 128*64 Dots LCD
      • Power Requirement AC220V/50 Hz
      • Wavelength Range 195-1000nmBand Width 1 nm
      • Wavelength Accuracy +/-0.5 nm
      • Wavelength Repeatability +0.1nmWavelength Setting Automatic
      • Photometric Display Range -0.3-3.0A,0-200%T, 0-9999CStability +0.002A/h @ 500nm
      Send Bulk Enquiry
      REQUEST CALLBACK
      Ask Latest Price
      Product Details:
      BrandAtico
      ApplicationLaboratory Use
      Wavelength Range (nm)190-1100 nm
      Description:
      Single Beam Visible spectrophotometers is designed to conserve benchspace, our product offers the measurement range of 190-1100nm at bandwidth of 2nm. Engineered for a wide range of applications, our systems provide dependable performance and reliable results. It produces the photometric range of -0.3 to 3 A; 0-200 %T and photometric accuracy of ±0.3%T which makes it suitable for various quantitative assays.

      Specification:

      • Wavelength accuracy +/-0.5 nm
      • Data Output Port USB
      • Printer Port Parallel Port
      • Display 128*64 Dots LCD
      • Power Requirement AC220V/50 Hz
      • wavelength repeatability +0.1nmPhotometric display range -0.3-3.0A,0-200%T, 0-9999COptical System Single Beam, Grating 1200 lines/mm
      • Wavelength Range 200-1000nmBand Width 1 nm
      • Wavelength Setting Automatic
      • Photometric Repeatability +0.3 %T
      • Stability +0.002A/h @ 500nm
      Send Bulk Enquiry
      X
       

      Download Brochure
      Explore more products
      Advanced Technocracy Inc.

      Kunal Chopra(CEO)
      ATICO House 5309, Grain Market, Near B.D. Senior Secondary School
      Ambala - 133001
      Haryana, India
      Send Email
      © Advanced Technocracy Inc.. All Rights Reserved (Terms of Use)
      Developed and Managed by IndiaMART InterMESH Limited